Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel

doi:10.3390/met12030467

IMR OpenIR

	Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel
	Cui, Chunsheng 1; Nie, Jinhao 2; Li, Yuxin 3; Guan, Qingfeng 4; Cai, Jie 5,6; Zhang, Pengfei 7; Wu, Jie 8
通讯作者	Li, Yuxin(liyuxin326@hotmail.com) ; Wu, Jie(jwu10s@imr.ac.cn)
	2022-03-01
发表期刊	METALS
卷号	12 期号:3 页码:12
摘要	In order to enhance the wear resistance of 304 stainless steel, a FeCrAlNbNi alloyed zone (AZ) was deposited on its surface using laser surface alloying technology, and the wear resistance of the AZ was investigated. The results found that the AZ had a dense and fine structure and no obvious defects, and the microstructure was mainly composed of equiaxed dendrites. A large amount of iron compounds and iron-based solid solutions in the AZ made the average microhardness of the AZ about 2.6 times higher than of the substrate. The friction and wear performance of the AZ at 25 degrees C, 200 degrees C, 400 degrees C and 600 degrees C better than that of the substrate. As far as the AZ was concerned, the abrasion resistance was the best under normal temperature environment. At 200 degrees C and 400 degrees C, due to the repeated extrusion and grinding of the friction pair, the oxide layer formed on the AZ surface was prone to microcracks and peeling off, which reduces the wear resistance. Especially at 400 degrees C, the formation and peeling speed of the oxide layer is accelerated, and the wear resistance is the lowest. However, when the temperature reached 600 degrees C, an Al2O3 layer was formed. And the Al2O3 has greater wear resistance to protect the AZ. At this time, the wear resistance was greatly improved compared to 200 degrees C and 400 degrees C. Therefore, as the temperature increased, the wear resistance of the AZ first decreased and then increased.
关键词	laser surface alloying microstructure microhardness wear resistance
资助者	National Natural Science Foundation of China ; Shanxi Scholarship Council of China
DOI	10.3390/met12030467
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[U1810112] ; Shanxi Scholarship Council of China[2021-126]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000778931600001
出版者	MDPI
引用统计	被引频次：4[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/173069
专题	中国科学院金属研究所
通讯作者	Li, Yuxin; Wu, Jie
作者单位	1.North Univ China, Sci & Technol Elect Test & Measurement Lab, Taiyuan 030051, Peoples R China 2.Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150080, Peoples R China 3.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China 4.Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China 5.Jiangsu Univ, Inst Adv Mfg & Modern Equipment Technol, Zhenjiang 212013, Jiangsu, Peoples R China 6.Jiangsu Univ, Sch Mech Engn, Zhenjiang 212013, Jiangsu, Peoples R China 7.Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Lab Mat Welding & Joining, Beijing 100083, Peoples R China 8.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Cui, Chunsheng,Nie, Jinhao,Li, Yuxin,et al. Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel[J]. METALS,2022,12(3):12.
APA	Cui, Chunsheng.,Nie, Jinhao.,Li, Yuxin.,Guan, Qingfeng.,Cai, Jie.,...&Wu, Jie.(2022).Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel.METALS,12(3),12.
MLA	Cui, Chunsheng,et al."Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel".METALS 12.3(2022):12.