Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue

doi:10.1002/adsu.202100329

IMR OpenIR

	Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue
	Zhang, Yang 1; Chen, Yu 2; Jiang, Yue 3; Sui, Guoxin 1
通讯作者	Jiang, Yue(yjiang@zjxu.edu.cn) ; Sui, Guoxin(gxsui@imr.ac.cn)
	2021-12-19
发表期刊	ADVANCED SUSTAINABLE SYSTEMS
ISSN	2366-7486
页码	8
摘要	3D printing of biomass has attracted increasing attention and can meet the requirements of various practical applications. Herein, 3D printing of a cellulose-based aerogel is achieved by direct ink writing based on a self-thickening and self-strengthening strategy, followed by freezing drying. The magnetic cellulose-based aerogels (MCAs) containing Fe3O4 nanoparticles are ideal adsorbents for adsorbing and removing organic pollutants from water. As catchers and carriers for magnetic removal, MCAs (Fe3O4 nanoparticles and cellulose) provide large active sites, which allows organic pollution to be quickly and stably bound on the surface. The adsorption effect of methylene blue (MB) is dependent on pH and the removal efficiency of MB (5.6 mg l(-1), pH = 9) is 88.5% for MCA, which occurs almost instantaneously at room temperature. In addition, the collected aerogel-MB hybrid can be reactivated by acid-washing (pH = 3) without obvious changes in the adsorption performance of MCA. The MCA exhibits a fast, efficient and sustainable removal of organic pollutants, which provides an inexpensive and recyclable method for water remediation.
关键词	magnetic adsorption magnetic cellulose-based aerogels self-thickening strategy self-strengthening strategy
资助者	National Natural Science Foundation of China
DOI	10.1002/adsu.202100329
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51803200] ; National Natural Science Foundation of China[52003104]
WOS研究方向	Science & Technology - Other Topics ; Materials Science
WOS类目	Green & Sustainable Science & Technology ; Materials Science, Multidisciplinary
WOS记录号	WOS:000734119300001
出版者	WILEY-V C H VERLAG GMBH
引用统计	被引频次：12[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/173791
专题	中国科学院金属研究所
通讯作者	Jiang, Yue; Sui, Guoxin
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.AECC Beijing Inst Aeronaut Mat, Beijing 100095, Peoples R China 3.Jiaxing Univ, China Australia Inst Adv Mat & Mfg, Jiaxing 314001, Peoples R China
推荐引用方式 GB/T 7714	Zhang, Yang,Chen, Yu,Jiang, Yue,et al. Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue[J]. ADVANCED SUSTAINABLE SYSTEMS,2021:8.
APA	Zhang, Yang,Chen, Yu,Jiang, Yue,&Sui, Guoxin.(2021).Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue.ADVANCED SUSTAINABLE SYSTEMS,8.
MLA	Zhang, Yang,et al."Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue".ADVANCED SUSTAINABLE SYSTEMS (2021):8.