<p>Microstructure evolution of twinning-induced shear bands and correlation with 'RD-split' texture during hot rolling in a Mg-1.1Zn-0.76Y-0.56Zr alloy</p>

doi:10.1016/j.matchar.2022.111853

IMR OpenIR

	Microstructure evolution of twinning-induced shear bands and correlation with 'RD-split' texture during hot rolling in a Mg-1.1Zn-0.76Y-0.56Zr alloy
	Shi, B. Q.1,5; Wang, Y. Z.1; Shang, X. L.4; Zhao, L. Y.1,5; Li, C. Q.2; Chen, D. C.1,5; Nie, B. H.1,5; Chen, R. S.3; Ke, W.3
通讯作者	Li, C. Q.(chuanqiang.li@gdut.edu.cn) ; Chen, R. S.(rschen@imr.ac.cn)
	2022-05-01
发表期刊	MATERIALS CHARACTERIZATION
ISSN	1044-5803
卷号	187 页码:14
摘要	Unlike the recrystallization-induced shear band mechanism which has been well accepted for the RE-free Mg alloys during rolling, an understanding of deformed microstructure evolution (twin mode/variant selection and dislocations) at different strains is crucial for interpreting the shear band mechanism in the RE-containing Mg alloys upon hot rolling. In this study, a Mg-1.1Zn-0.76Y-0.56Zr alloy ingot was subjected to hot rolling at 440 C with single-pass reductions of 10-50%, and the microstructure evolution and texture development of this hot rolled plates at different reductions were investigated, with aim to disclose the roles of different types of twins/variants and dislocation mechanisms in the shear band (SB) formation and their correlation with the macro-texture characteristics. As the dominate twinning mode for most parent grains at lower reductions, and the primary {10-12} extension twins/variants together with basal slip activated in twins contribute to formation of basal texture in the twinned grains, thus subsequently facilitating the operation of secondary {10-11} and {10-13} compression twins and following {10-12} twins. Afterwards cross-grain boundary (GB) paired twins for compression twin and their double twins were frequently observed at the nearby basal-oriented parent grains with low misorientation (& LE;34.5), which should correspond to the predecessor of SBs. Further EBSD observation at higher reductions (R0.4 and R0.5) reveals that most of the banding structures are distributed homogenously and are likely transformed from the {10-11}-{10-12} twins, which are the predominant twin types under such state. The 'RD-split' textures start to be formed at lower reductions (R0.3) and keeps stable at higher reductions (R0.4-R0.5), which were explained by the correlations with some variant pairs of {10-12} twins and/or {10-11}-{10-12} twins predicted by Schimid factor analysis as well as shear bands. Nevertheless, the contributions of slip to the 'RD-split' texture could be ignored on basis of corresponding EBSD analysis and reappearance of such texture after rolling at a low temperature (170 ?).
关键词	Magnesium alloys Shear bands Twinning Texture Rolling
资助者	Basic and Applied Basic Research Fund of Guangdong Province of China ; State Key Laboratory for Mechanical Behavior of Materials ; National Natural Science Foundation of China ; Key R & D projects in Guangdong Province ; Guangdong Province Science and technology program ; Core technology research project of Foshan ; R&D plan for key areas in Jiangxi Province ; Special Innovation Projects of Universities in Guangdong Province ; National Key Research and Development Program of China
DOI	10.1016/j.matchar.2022.111853
收录类别	SCI
语种	英语
资助项目	Basic and Applied Basic Research Fund of Guangdong Province of China[2019A1515110573] ; Basic and Applied Basic Research Fund of Guangdong Province of China[2019A1515110528] ; State Key Laboratory for Mechanical Behavior of Materials[20212312] ; National Natural Science Foundation of China[51801029] ; National Natural Science Foundation of China[51901047] ; Key R & D projects in Guangdong Province[2020B010186001] ; Guangdong Province Science and technology program[2020B121202002] ; Core technology research project of Foshan[1920001000412] ; R&D plan for key areas in Jiangxi Province[20201BBE51009] ; Special Innovation Projects of Universities in Guangdong Province[2018KTSCX240] ; National Key Research and Development Program of China[2016YFB0301104]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Materials Science, Characterization & Testing
WOS记录号	WOS:000793611900001
出版者	ELSEVIER SCIENCE INC
引用统计	被引频次：22[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/173909
专题	中国科学院金属研究所
通讯作者	Li, C. Q.; Chen, R. S.
作者单位	1.Foshan Univ, Sch Mat Sci & Hydrogen Energy, Foshan 528000, Peoples R China 2.Guangdong Univ Technol, Sch Mat & Energy, Guangzhou 510006, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, Shenyang 110016, Peoples R China 4.GD Midea Air Conditioning Equipment Co Ltd, Foshan 528311, Peoples R China 5.Guangdong Key Lab Hydrogen Energy Technol, Foshan 528000, Peoples R China
推荐引用方式 GB/T 7714	Shi, B. Q.,Wang, Y. Z.,Shang, X. L.,et al. Microstructure evolution of twinning-induced shear bands and correlation with 'RD-split' texture during hot rolling in a Mg-1.1Zn-0.76Y-0.56Zr alloy [J]. MATERIALS CHARACTERIZATION,2022,187:14.
APA	Shi, B. Q..,Wang, Y. Z..,Shang, X. L..,Zhao, L. Y..,Li, C. Q..,...&Ke, W..(2022). Microstructure evolution of twinning-induced shear bands and correlation with 'RD-split' texture during hot rolling in a Mg-1.1Zn-0.76Y-0.56Zr alloy .MATERIALS CHARACTERIZATION,187,14.
MLA	Shi, B. Q.,et al." Microstructure evolution of twinning-induced shear bands and correlation with 'RD-split' texture during hot rolling in a Mg-1.1Zn-0.76Y-0.56Zr alloy ".MATERIALS CHARACTERIZATION 187(2022):14.