| Effect of laser scanning speed on microstructure and mechanical properties of SLM porous Ti-5Al-5V-5Mo-3Cr-1Fe alloy | |
| Yuan, Wei1; Zhao, Xiaoli2; Li, Shujun3; Zhu, Yue1 | |
| Corresponding Author | Li, Shujun(shjli@imr.ac.cn) ; Zhu, Yue(zhuyuedr@163.com) |
| 2022-08-04 | |
| Source Publication | FRONTIERS IN MATERIALS
 |
| ISSN | 2296-8016 |
| Volume | 9Pages:10 |
| Abstract | In this study, porous Ti-55531(Fe) was fabricated by selective laser melting (SLM) with different laser scanning speeds. The microstructures, surface morphology, inner defects, porosity, microhardness, and compressive behaviors were studied. The variation of lattice constant and hardness were analyzed. The results show that all the specimens have a density of & SIM;1 g/cm(3), and a Vicker's hardness with a range of 280-320 Hv0.1. The porosity of the SLM-produced materials is greater than the designed value (77%) and increases from 77.33% to 82.33% with the increase of laser scanning speed from 500 mm/s to 1,500 mm/s. Continuous irregular columnar dendrites, a large number of gas-induced defects with small size between 20 and 60 mu m and a deep molten pool form in the specimens fabricated with a laser scanning speed less than 1,000 mm/s. Some defects, elongated voids and interrupted columnar dendrites are identified in the specimens fabricated with the laser scanning speed more than 1,000 mm/s caused by the insufficient input energy. All specimens with different laser scanning speeds show the single ss phase patterns. The compressive strength of the specimens with the laser scanning speed of 500 mm/s is maintained at 32 MPa and the compressive strength decreases with the increase of laser scanning speed. The specimens with a scanning speed of 500 mm/s present the best mechanical properties and surface quality. |
| Keyword | metamaterial beta-titanium microstructure mechanical behavior selective laser melting |
| Funding Organization | Chinese MoST ; Key Research Program of Frontier Sciences, CAS ; National Natural Science Foundation of China ; Scientific Research Foundation of Educational Department of Liaoning Province ; China Postdoctoral Science Foundation ; State Key Laboratory of Light Alloy Casting Technology for High-end Equipment ; Shenyang Talents program ; CAS Interdisciplinary Innovation Team Project |
| DOI | 10.3389/fmats.2022.973829 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | Chinese MoST[2017YFC1104903] ; Key Research Program of Frontier Sciences, CAS[QYZDJ-SSW-JSC031-02] ; National Natural Science Foundation of China[81902191] ; National Natural Science Foundation of China[51871220] ; National Natural Science Foundation of China[51922026] ; Scientific Research Foundation of Educational Department of Liaoning Province[QN2019001] ; China Postdoctoral Science Foundation[2021M693523] ; State Key Laboratory of Light Alloy Casting Technology for High-end Equipment[LACT-007] ; Shenyang Talents program[RC200230] ; CAS Interdisciplinary Innovation Team Project[JCTD-2020-10] |
| WOS Research Area | Materials Science |
| WOS Subject | Materials Science, Multidisciplinary |
| WOS ID | WOS:000843240200001 |
| Publisher | FRONTIERS MEDIA SA |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/174546 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Li, Shujun; Zhu, Yue |
| Affiliation | 1.China Med Univ, Hosp 1, Dept Orthoped, Shenyang, Peoples R China 2.Northeastern Univ, Inst Mat Sci, Sch Mat Sci & Engn, Shenyang, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang, Peoples R China |
| Recommended Citation GB/T 7714 | Yuan, Wei,Zhao, Xiaoli,Li, Shujun,et al. Effect of laser scanning speed on microstructure and mechanical properties of SLM porous Ti-5Al-5V-5Mo-3Cr-1Fe alloy[J]. FRONTIERS IN MATERIALS,2022,9:10. |
| APA | Yuan, Wei,Zhao, Xiaoli,Li, Shujun,&Zhu, Yue.(2022).Effect of laser scanning speed on microstructure and mechanical properties of SLM porous Ti-5Al-5V-5Mo-3Cr-1Fe alloy.FRONTIERS IN MATERIALS,9,10. |
| MLA | Yuan, Wei,et al."Effect of laser scanning speed on microstructure and mechanical properties of SLM porous Ti-5Al-5V-5Mo-3Cr-1Fe alloy".FRONTIERS IN MATERIALS 9(2022):10. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment