Fretting Fatigue Test and Simulation Analysis of Steam Generator Heat Transfer Tube

doi:10.3390/met13010067

IMR OpenIR

	Fretting Fatigue Test and Simulation Analysis of Steam Generator Heat Transfer Tube
	Tang, Lichen 1; Qian, Hao 1; Li, Chen 1; Wu, Xinqiang 2
通讯作者	Tang, Lichen(tanglichen@snerdi.com.cn)
	2023
发表期刊	METALS
卷号	13 期号:1 页码:14
摘要	In a steam generator, the heat transfer tubes are supported by the contact with support plates and anti-vibration bars. The two-phase flow flows over the tubes and causes a vibration when operating. In fatigue analysis, the heat transfer tube is simplified to a beam model, and the contacts with the support plates and the anti-vibration bars are simplified as simple-supported boundary conditions. This linear simplification improves the computational efficiency but cannot simulate the actual situation of the contact area. In consideration of this situation, in the actual analysis, a downwards modified S-N fatigue curve is used to envelop the fretting. For different materials and contact pressure, this modification needs to be obtained through experimental and computational analysis. In this paper, the effect of fretting on fatigue performance of heat transfer tube material 690 alloy is discussed by means of high cycle fretting fatigue test of tube specimen in room temperature air, low cycle fretting fatigue test of sheet specimen in high temperature water environment, and SWT (Smith-Watson-Topper) fretting fatigue predicting simulation, and the conservatism of design fatigue curve is discussed. It is shown that, in range of low cycle and high cycle, the fatigue strength is lower than the mean curve, but it can still be enveloped by the design curve of ASME (the American Society of Mechanical Engineers). However, under the condition of ultra-high cycle, the design curve of ASME can no longer envelop the effect of fretting on fatigue performance, so a further downward modification is necessary to ensure the safety of design.
关键词	heat-transfer tube fretting fatigue test numerical simulation 690 alloy fatigue design curve
DOI	10.3390/met13010067
收录类别	SCI
语种	英语
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000916161000001
出版者	MDPI
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/175360
专题	中国科学院金属研究所
通讯作者	Tang, Lichen
作者单位	1.Shanghai Nucl Engn Res & Design Inst Co Ltd, Shanghai 200233, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Tang, Lichen,Qian, Hao,Li, Chen,et al. Fretting Fatigue Test and Simulation Analysis of Steam Generator Heat Transfer Tube[J]. METALS,2023,13(1):14.
APA	Tang, Lichen,Qian, Hao,Li, Chen,&Wu, Xinqiang.(2023).Fretting Fatigue Test and Simulation Analysis of Steam Generator Heat Transfer Tube.METALS,13(1),14.
MLA	Tang, Lichen,et al."Fretting Fatigue Test and Simulation Analysis of Steam Generator Heat Transfer Tube".METALS 13.1(2023):14.