Relationship between annealing time and the mechanical, tribological and corrosion properties of Ni-Mo/diamond coatings | |
Liu, J. H.1,3,4; Yan, J. X.2,3,4; Pei, Z. L.3,4; Luo, L. Z.1 | |
通讯作者 | Yan, J. X.(jxyan@cqjtu.edu.cn) ; Pei, Z. L.(zlpei@imr.ac.cn) |
2022-12-01 | |
发表期刊 | MATERIALS CHEMISTRY AND PHYSICS
![]() |
ISSN | 0254-0584 |
卷号 | 292页码:10 |
摘要 | The relationship between structure and mechanical, tribological and corrosion properties of coatings is inves-tigated by adjusting the annealing time (750 degrees C for 1-10 h). Results exhibit that the coatings mainly consist of Ni (Mo) and Mo2C, and MoC is formed after long time annealing (>= 4 h). The hardness of coatings decreases from 9.3 GPa to 5.9 GPa with the extension of annealing time, and the inversion relationship between strength and toughness (0.19-0.17) is observed owing to the decline of elastic recovery. The highest wear rate of coatings is about 13.6 x 10-6 mm3 N-1 m-1, and most of them under the applied load of 1.96 N and 3.92 N are in the range of 2.1-6.3 x 10-6 mm3 N-1 m-1. Meanwhile, the wear resistance of coatings annealed for 1-4 h is better than those annealed for longer time (6-10 h), and the change of it is proportional to the hardness and elasticity re-covery. In addition, the corrosion resistance of coatings in 3.5 wt% NaCl solution decreases with annealing time due to the grain growth, the uneven distribution of composition and the increase of porosity. |
关键词 | Ni-Mo Diamond coating Graphitization Hardness Tribological property Electrochemical property |
DOI | 10.1016/j.matchemphys.2022.126835 |
收录类别 | SCI |
语种 | 英语 |
WOS研究方向 | Materials Science |
WOS类目 | Materials Science, Multidisciplinary |
WOS记录号 | WOS:000869046100002 |
出版者 | ELSEVIER SCIENCE SA |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/176283 |
专题 | 中国科学院金属研究所 |
通讯作者 | Yan, J. X.; Pei, Z. L. |
作者单位 | 1.Southwest Technol & Engn Res Inst, Chongqing 400039, Peoples R China 2.Chongqing Jiaotong Univ, Sch Mat Sci & Engn, Chongqing 400074, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, 72 Wenhua Rd, Shenyang 110016, Peoples R China 4.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, J. H.,Yan, J. X.,Pei, Z. L.,et al. Relationship between annealing time and the mechanical, tribological and corrosion properties of Ni-Mo/diamond coatings[J]. MATERIALS CHEMISTRY AND PHYSICS,2022,292:10. |
APA | Liu, J. H.,Yan, J. X.,Pei, Z. L.,&Luo, L. Z..(2022).Relationship between annealing time and the mechanical, tribological and corrosion properties of Ni-Mo/diamond coatings.MATERIALS CHEMISTRY AND PHYSICS,292,10. |
MLA | Liu, J. H.,et al."Relationship between annealing time and the mechanical, tribological and corrosion properties of Ni-Mo/diamond coatings".MATERIALS CHEMISTRY AND PHYSICS 292(2022):10. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论