Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel

doi:10.3390/met12101758

IMR OpenIR

	Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel
	Yao, Xin 1; Huang, Jie 1,2; Qiao, Yanxin 1; Sun, Mingyue 2; Wang, Bing 2; Xu, Bin 2
通讯作者	Qiao, Yanxin(yxqiao@just.edu.cn) ; Sun, Mingyue(mysun@imr.ac.cn)
	2022-10-01
发表期刊	METALS
卷号	12 期号:10 页码:12
摘要	In this study, quenching and tempering were employed to achieve the optimal match of strength and toughness of the high-strength low-alloy (HSLA) 15CrNi3MoV steel. The effect of the tempering temperature on the microstructure evolution and the carbides precipitation of the steel was also investigated using scanning electron microscopy (SEM), a X-ray diffractometer (XRD) and transmission electron microscopy (TEM). The results showed that after tempering at different temperatures, the microstructure of 15CrNi3MoV steel was tempered martensite. During the tempering process, the M3C carbides precipitated on the ferrite matrix, the needle-like carbides accumulated and grew into a short rodlike shape or a granular shape with the increase of the tempering temperature. Subsequently, the strength and hardness of the steel showed a downward trend, and the elongation and the low temperature impact toughness showed an upward trend. The tensile strength and yield strength of the steel tempered at 650 degrees C decreased dramatically compared with the steel tempered at 550 degrees C, while the elongation increased rapidly. Considering the influence of the microstructure and the carbides and the demand for mechanical properties, the optimal tempering temperature is about 600 degrees C.
关键词	high-strength low-alloy (HSLA) steel tempering mechanical properties carbides
资助者	National Key Research and Development Program ; National Science and Technology Major Project of China ; Key Program of the Chinese Academy of Sciences ; CAS Interdisciplinary Innovation Team
DOI	10.3390/met12101758
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program[2018YFA0702900] ; National Science and Technology Major Project of China[2019ZX060040100] ; Key Program of the Chinese Academy of Sciences[ZDRW-CN-2017-1] ; CAS Interdisciplinary Innovation Team
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000875039500001
出版者	MDPI
引用统计	被引频次：5[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/176413
专题	中国科学院金属研究所
通讯作者	Qiao, Yanxin; Sun, Mingyue
作者单位	1.Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang 212003, Jiangsu, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Yao, Xin,Huang, Jie,Qiao, Yanxin,et al. Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel[J]. METALS,2022,12(10):12.
APA	Yao, Xin,Huang, Jie,Qiao, Yanxin,Sun, Mingyue,Wang, Bing,&Xu, Bin.(2022).Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel.METALS,12(10),12.
MLA	Yao, Xin,et al."Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel".METALS 12.10(2022):12.