Effect of Q value on geometric tolerance, roughness and texture evolution of GH4145 alloy tubes

doi:10.1016/j.jallcom.2023.172498

IMR OpenIR

	Effect of Q value on geometric tolerance, roughness and texture evolution of GH4145 alloy tubes
	Wang, Leiwen 1; Xing, Pichen 1; Zhang, Xiaoyue 1; Zhang, Weihong 2; Sun, Wenru 2
通讯作者	Zhang, Weihong(whzhang@imr.ac.com) ; Sun, Wenru(wrsun@imr.ac.cn)
	2023-12-25
发表期刊	JOURNAL OF ALLOYS AND COMPOUNDS
ISSN	0925-8388
卷号	969 页码:11
摘要	The Q value represents the ratio of the relative reduction in the wall thickness to the relative reduction in the outer diameter during cold-rolling of a tube. The influence of the Q value on the geometric tolerance, roughness, and plastic deformation was determined through laser scanning confocal microscopy, white light interferometry, and electron backscattering diffraction. In this study, nine tube blanks with the same specifications were divided equally into three groups. The outer diameter of each group was reduced by 1 mm, 2 mm, and 3 mm, and the wall thickness of each tube blank was reduced by different amounts. Thus, each group contained one tube with Q values of 0.76, 1.52, and 2.28. Compared with the corresponding blank, the eccentricity, ovality, and roughness of the tube were reduced with a Q value of 0.76. The ovality and roughness of the tube were decreased and the eccentricity was increased with a Q value of 2.28. The eccentricity, ovality, and roughness of the tube were increased with a Q value of 1.52. In terms of texture evolution, with an increase in Q, the < 101 > //radial-direction (RD), < 111 > //axial-direction (AD), and < 101 > //tangential-direction (TD) fibre textures first increased and then decreased. The texture strength was the highest in tubes with a Q value of 1.52, mainly concentrated in the Goss, {011}< 122 > , and copper texture. In the cold-rolling process, the plastic deformation of the tube with a Q value of 0.76 was uniform throughout the section; the plastic deformation of the tube with a Q value of 1.52 near the inner wall was greater; the plastic deformation of the tube with a Q value of 2.28 near the outer wall was even greater. In summary, in the cold-rolling process, the Q value affects the location of plastic deformation and the evolution of grain orientation, which affects the flow of materials and ultimately affects the geometric tolerance and roughness of the tube. Thus, a tube with good surface quality and high-dimensional precision can be obtained by controlling the Q value.
关键词	GH4145 alloy Q value Geometric tolerance Roughness Texture
DOI	10.1016/j.jallcom.2023.172498
收录类别	SCI
语种	英语
WOS研究方向	Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:001101610200001
出版者	ELSEVIER SCIENCE SA
引用统计	被引频次：1[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/177340
专题	中国科学院金属研究所
通讯作者	Zhang, Weihong; Sun, Wenru
作者单位	1.AECC Shenyang Engine Res Inst, 1 Jiangdong St, Shenyang 110015, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, 72 Wenhua Rd, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Wang, Leiwen,Xing, Pichen,Zhang, Xiaoyue,et al. Effect of Q value on geometric tolerance, roughness and texture evolution of GH4145 alloy tubes[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2023,969:11.
APA	Wang, Leiwen,Xing, Pichen,Zhang, Xiaoyue,Zhang, Weihong,&Sun, Wenru.(2023).Effect of Q value on geometric tolerance, roughness and texture evolution of GH4145 alloy tubes.JOURNAL OF ALLOYS AND COMPOUNDS,969,11.
MLA	Wang, Leiwen,et al."Effect of Q value on geometric tolerance, roughness and texture evolution of GH4145 alloy tubes".JOURNAL OF ALLOYS AND COMPOUNDS 969(2023):11.