Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture

doi:10.11900/0412.1961.2022.00293

IMR OpenIR

	Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture
	Zhao Yafeng 1,2; Liu Sujie 1; Chen Yun 1; Ma Hui 1; Ma Guangcai 3; Guo Yi 1
通讯作者	Guo Yi(yguo@imr.ac.cn)
	2023-05-01
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	59 期号:5 页码:611-622
摘要	Ferrite-bainite dual-phase steel is widely used in the automotive industry owing to its high strength and excellent ductility. The impact of inclusions and void growth behavior in dual-phase steel is a major concern among researchers seeking to achieve better mechanical properties. To investigate this, a cross-length-scale multimodal method was employed to study the influence of local microstructures on void growth during ductile fracture of a dual-phase ferrite-bainite steel. During tensile testing, laboratory X-ray computed tomography (XCT) was used to measure the evolution of void volume. 3D-electron back scatter diffraction (3D-EBSD) provided information about the voids nucleated at both inclusion particles and bainite phases or their boundaries. Carefully controlled, broad-focused ion beam excavation was performed to reveal a new interface at a specific depth of the voids. Results showed that voids resulting from large inclusions are significantly bigger than either small inclusions or the bainite phase. Large inclusions lead to large voids even when the strain correlated with the growth of those voids is lower. An investigation of the dislocation densities surrounding the voids suggested that they may be related to the strain gradient around the different inclusion sizes. A critical inclusion size estimated to be around 1.85-2.86 mu m was found below which nucleation occurs but with limited growth. The elevated rate of local dislocation multiplication due to local deformation gradient effects can impede the growth of smaller voids. The growth of voids is heterogeneous, and their shape correlates well with the deformability of the surrounding grains, as indicated by a Schmid factor weighted using the grain size. This weighted Schmid factor explains not only the shape of the voids but also sheds light on the ease of void coalescence based on the microstructures separating the voids.
关键词	dual-phase ferrite-bainite steel void nucleation and growth 3D-EBSD X-ray computed tomography size effect
资助者	National Natural Science Foundation of China ; National Science and Technology Major Project ; Strategic Priority Research Program of Chinese Academy of Sciences ; ERC CORREL-CT Project
DOI	10.11900/0412.1961.2022.00293
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[52201149] ; National Science and Technology Major Project[J2019-VI-0019-0134] ; Strategic Priority Research Program of Chinese Academy of Sciences ; ERC CORREL-CT Project[695638]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000971778800003
出版者	SCIENCE PRESS
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/177585
专题	中国科学院金属研究所
通讯作者	Guo Yi
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Zhao Yafeng,Liu Sujie,Chen Yun,et al. Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture[J]. ACTA METALLURGICA SINICA,2023,59(5):611-622.
APA	Zhao Yafeng,Liu Sujie,Chen Yun,Ma Hui,Ma Guangcai,&Guo Yi.(2023).Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture.ACTA METALLURGICA SINICA,59(5),611-622.
MLA	Zhao Yafeng,et al."Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture".ACTA METALLURGICA SINICA 59.5(2023):611-622.