IMR OpenIR
Effect of rolling reduction on deformation mechanism and twinning behavior of WE43 magnesium alloy
Li, Qian-kun1,2; Yan, Hong1,2; Chen, Rong-shi1,2
通讯作者Yan, Hong(hyan@imr.ac.cn) ; Chen, Rong-shi(rschen@imr.ac.cn)
2022-12-01
发表期刊TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
ISSN1003-6326
卷号32期号:12页码:3901-3913
摘要The effect of rolling reduction of the last pass on the dislocation slip and twinning behavior during direct hot rolling of a cast WE43 magnesium alloy at 480 degrees C was investigated. The results showed that prismatic < a > slip was always the main deformation mode during rolling at 480 degrees C. In addition, the activated twinning type was associated with rolling reduction. The {10 (1) over bar2} extension twinning was activated at a slight rolling reduction (2%), while {10 (1) over bar1} compression twinning and {10 (1) over bar1} -{10 (1) over bar2} double twinning were activated at larger rolling reduction (12% and 20%). Schmid factor calculation showed that the activation of {10 (1) over bar2} extension twin variants followed the Schmid Law, whereas the activation of {10 (1) over bar1} compression twin variants did not follow it. Even if the rolling reduction reached 20%, almost no dynamic recrystallization (DRX) grains were found, presumably because the amount of deformation required for DRX to occur was not reached.
关键词magnesium alloy deformation twin variants recrystallization
资助者Natural Science Foundation of Liaoning Province, China ; National Natural Science Foundation of China ; National Key Research and Development Program of China ; State Key Program of National Natural Science of China
DOI10.1016/S1003-6326(22)66066-7
收录类别SCI
语种英语
资助项目Natural Science Foundation of Liaoning Province, China[2020-MS-004] ; National Natural Science Foundation of China[51601193] ; National Natural Science Foundation of China[51701218] ; National Key Research and Development Program of China[2016YFB0301104] ; State Key Program of National Natural Science of China[51531002]
WOS研究方向Metallurgy & Metallurgical Engineering
WOS类目Metallurgy & Metallurgical Engineering
WOS记录号WOS:000988117800005
出版者ELSEVIER
引用统计
被引频次:8[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/177892
专题中国科学院金属研究所
通讯作者Yan, Hong; Chen, Rong-shi
作者单位1.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Li, Qian-kun,Yan, Hong,Chen, Rong-shi. Effect of rolling reduction on deformation mechanism and twinning behavior of WE43 magnesium alloy[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2022,32(12):3901-3913.
APA Li, Qian-kun,Yan, Hong,&Chen, Rong-shi.(2022).Effect of rolling reduction on deformation mechanism and twinning behavior of WE43 magnesium alloy.TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,32(12),3901-3913.
MLA Li, Qian-kun,et al."Effect of rolling reduction on deformation mechanism and twinning behavior of WE43 magnesium alloy".TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 32.12(2022):3901-3913.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Li, Qian-kun]的文章
[Yan, Hong]的文章
[Chen, Rong-shi]的文章
百度学术
百度学术中相似的文章
[Li, Qian-kun]的文章
[Yan, Hong]的文章
[Chen, Rong-shi]的文章
必应学术
必应学术中相似的文章
[Li, Qian-kun]的文章
[Yan, Hong]的文章
[Chen, Rong-shi]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。