| Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti-Ni alloy fabricated by selective laser melting | |
| Ren, Dechun1; Zhang, Lianmin2; Liu, Yujing3; Ji, Haibin1; Li, Shujun1; Jin, Wei1; Lei, Jiafeng1 | |
| Corresponding Author | Zhang, Lianmin(lmzhang14s@imr.ac.cn) ; Ji, Haibin(hbji@imr.ac.cn) ; Jin, Wei(wjin@imr.ac.cn) |
| 2023-09-01 | |
| Source Publication | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
 |
| ISSN | 2238-7854 |
| Volume | 26Pages:4595-4605 |
| Abstract | Hot isostatic pressing (HIP) is capable of mitigating the internal defects of materials, such as pores and cracks, resulting in improved mechanical properties and corrosion resistance, so it is particularly suitable as a post-treatment technology for the Ti-Ni alloys fabricated by selective laser melting (SLM), which display a broad application prospect in the biomedical field. Herein, the effect of HIP treatment on the mechanical and corrosion-resistant prop-erties of SLM Ti-Ni alloys was systematically investigated. It was demonstrated that HIP treatment did not substantially affect the phase transformation behavior of the SLM Ti-Ni alloy, only showing a slight decrease in the values of As and Ms. However, HIP treatment improved the ultimate tensile strength and the elongation to fracture of the SLM Ti-Ni alloy by 67.3% and 23.2%, respectively. Meanwhile, the corrosion current density was reduced by two orders of magnitude after HIP treatment, indicating the significantly increased corrosion resistance. The enhanced mechanical properties and corrosion resistance of SLM Ti-Ni alloy were credited with the elevated temperature and pressure applied during the HIP process, which significantly eliminated the porosity defects and made the microstructure more uniform. These findings highlight the importance of performing HIP to enhance the comprehensive properties of SLM Ti-Ni alloys, which can expand the application prospects of SLM Ti-Ni alloys in the biomedical field. & COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). |
| Keyword | Ti-Ni alloys Selective laser melting Hot isostatic pressing Tensile property Corrosion resistance |
| Funding Organization | National Nat-ural Science Foundation of China ; CAS Interdisciplinary Innovation Team Project ; IMR Innovation Fund |
| DOI | 10.1016/j.jmrt.2023.08.197 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Nat-ural Science Foundation of China[52205431] ; National Nat-ural Science Foundation of China[52101105] ; CAS Interdisciplinary Innovation Team Project[JCTD-2020-10] ; IMR Innovation Fund[2023-PY03] |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:001069845900001 |
| Publisher | ELSEVIER |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/179223 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhang, Lianmin; Ji, Haibin; Jin, Wei |
| Affiliation | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China 2.Chinese Acad Sci, CAS Key Lab Nucl Mat & Safety Assessment, Inst Met Res, 62 Wencui Rd, Shenyang 110016, Peoples R China 3.Changsha Univ Sci & Technol, Inst Met, Coll Mat Sci & Engn, Changsha 410004, Peoples R China |
| Recommended Citation GB/T 7714 | Ren, Dechun,Zhang, Lianmin,Liu, Yujing,et al. Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti-Ni alloy fabricated by selective laser melting[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2023,26:4595-4605. |
| APA | Ren, Dechun.,Zhang, Lianmin.,Liu, Yujing.,Ji, Haibin.,Li, Shujun.,...&Lei, Jiafeng.(2023).Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti-Ni alloy fabricated by selective laser melting.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,26,4595-4605. |
| MLA | Ren, Dechun,et al."Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti-Ni alloy fabricated by selective laser melting".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 26(2023):4595-4605. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment