IMR OpenIR
Effect of pre-deformation homogenization on high-temperature deformation behavior and microstructure evolution of a new Ni-W-Cr superalloy
Huang, Meiqian1,2; Zhou, Zijian1; Cui, Chuanyong1; Wang, Xinguang1; Zhang, Rui1; Tao, Xipeng1; Ye, Xiang-xi3; Zhou, Yizhou1; Sun, Xiaofeng1
通讯作者Zhou, Zijian(zjzhou19b@imr.ac.cn) ; Cui, Chuanyong(chycui@imr.ac.cn)
2025-05-01
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号929页码:16
摘要To address the challenges posed by high tungsten (W) content (>= 26 wt.%) in a novel Ni-W-Cr alloy designed for next-generation molten salt energy systems, which leads to segregation of refractory elements and difficulties in conventional thermal deformation processing, the effects of pre-deformation homogenization on deformation behavior and microstructural evolution have been investigated. Techniques including scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM) were employed for analysis. A novel homogenization heat treatment method was developed for Ni-W-Cr alloys with elevated refractory element content. Pre-deformation introduces a range of defects, including dislocations and substructures, which act as diffusion channels, facilitating the rapid transport of elements and promoting the dissolution of refractory segregation phases, thereby significantly reducing homogenization time. Moreover, pre-deformation homogenization enhances the reprecipitation of carbides by dissolving large primary carbides into finely dispersed particles, strengthening grain boundaries and minimizing crack initiation at weak boundary regions. Additionally, dislocations and other defects serve as nucleation sites for dynamic recrystallization (DRX), promoting an additional continuous dynamic recrystallization (CDRX)-assisted nucleation mechanism. This mechanism significantly enhances DRX nucleation, thereby improving the hot workability of the alloy.
关键词Ni-W-Cr superalloy Pre-deformation Homogenization Recrystallization Microstructure evolution
资助者National Key Research and Devel-opment Program of China ; National Natural Science Foundation of China ; Innovation Program of Institute of Metal Research, Chinese Academy of Sciences
DOI10.1016/j.msea.2025.148112
收录类别SCI
语种英语
资助项目National Key Research and Devel-opment Program of China[2023YFB3508100] ; National Natural Science Foundation of China[52401068] ; Innovation Program of Institute of Metal Research, Chinese Academy of Sciences[2023-PY08]
WOS研究方向Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号WOS:001437918000001
出版者ELSEVIER SCIENCE SA
引用统计
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/179778
专题中国科学院金属研究所
通讯作者Zhou, Zijian; Cui, Chuanyong
作者单位1.Chinese Acad Sci, Inst Met Res, Shi changxu Innovat Ctr Adv Mat, 72 Wenhua Rd, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Peoples R China
3.Chinese Acad Sci, Shanghai Inst Appl Phys, Shanghai 201800, Peoples R China
推荐引用方式
GB/T 7714
Huang, Meiqian,Zhou, Zijian,Cui, Chuanyong,et al. Effect of pre-deformation homogenization on high-temperature deformation behavior and microstructure evolution of a new Ni-W-Cr superalloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2025,929:16.
APA Huang, Meiqian.,Zhou, Zijian.,Cui, Chuanyong.,Wang, Xinguang.,Zhang, Rui.,...&Sun, Xiaofeng.(2025).Effect of pre-deformation homogenization on high-temperature deformation behavior and microstructure evolution of a new Ni-W-Cr superalloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,929,16.
MLA Huang, Meiqian,et al."Effect of pre-deformation homogenization on high-temperature deformation behavior and microstructure evolution of a new Ni-W-Cr superalloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 929(2025):16.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Huang, Meiqian]的文章
[Zhou, Zijian]的文章
[Cui, Chuanyong]的文章
百度学术
百度学术中相似的文章
[Huang, Meiqian]的文章
[Zhou, Zijian]的文章
[Cui, Chuanyong]的文章
必应学术
必应学术中相似的文章
[Huang, Meiqian]的文章
[Zhou, Zijian]的文章
[Cui, Chuanyong]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。