Effect on wetting properties of the Al-Ti system by the addition of different alloying elements

doi:10.1088/1742-6596/2730/1/012009

IMR OpenIR

	Effect on wetting properties of the Al-Ti system by the addition of different alloying elements
	Zhu,Minxin 1,2; Zhang,Bo 1; Li,Zhengkun 3; Hao,Shuai 1
	2024-06-01
发表期刊	Journal of Physics: Conference Series
ISSN	1742-6588
卷号	2730 期号:1
摘要	Abstract With lightweight and high-strength, Al-Ti composites have become one of the indispensable materials in the aerospace and automotive manufacturing fields. However, due to strong interfacial reactions, the traditional pure Al-Ti composites have been limited in practical applications. To better control the interfacial reaction between the reinforced phase and the matrix in the Al-Ti composites, in this paper, the effect on wetting behavior and interfacial properties of the Al-Ti system by the addition of different alloying elements (Si, Mg, Zn, Cu) in Al melt were systematically investigated using the sessile drop method. According to the results, adding Si, Mg, Zn, and Cu elements to the Al melt can increase the steady-state wetting angle to varying degrees at the end of the holding period compared to the pure Al-Ti wetting but still maintains good wettability. The Mg, Zn, and Cu elements ensure good wettability and simultaneously reduce the temperature required for wetting, providing novel ideas for preparing aluminum matrix composites. All the systems in this experiment are typical of reactive wetting. The system with added Si and Cu showed a clear interfacial layer at the Al-Ti interface, which was comparatively smooth, and both the original Al-Ti reaction at the interface and the dissolution of the Ti substrate are inhibited.
DOI	10.1088/1742-6596/2730/1/012009
语种	英语
WOS记录号	IOP:JPCS_2730_1_012009
出版者	IOP Publishing
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/179919
专题	中国科学院金属研究所
作者单位	1.School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China 2.Shi Changxu Advanced Materials Innovation Center, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China 3.School of Metallurgy, Northeastern University, Shenyang 110004, China
推荐引用方式 GB/T 7714	Zhu,Minxin,Zhang,Bo,Li,Zhengkun,et al. Effect on wetting properties of the Al-Ti system by the addition of different alloying elements[J]. Journal of Physics: Conference Series,2024,2730(1).
APA	Zhu,Minxin,Zhang,Bo,Li,Zhengkun,&Hao,Shuai.(2024).Effect on wetting properties of the Al-Ti system by the addition of different alloying elements.Journal of Physics: Conference Series,2730(1).
MLA	Zhu,Minxin,et al."Effect on wetting properties of the Al-Ti system by the addition of different alloying elements".Journal of Physics: Conference Series 2730.1(2024).