Exploring the effect of bimodal microstructure on the mechanical properties of Mg-15Er binary alloy by regulating the extrusion ratio | |
Li, R. G.1; Zhu, J. X.1; Liu, B. S.1; Zhang, H.1; Li, S. S.1; Wu, D.2; Sha, S.1; Guo, S. G.1 | |
通讯作者 | Zhang, H.(zhanghang@syuct.edu.cn) ; Wu, D.(dwu@imr.ac.cn) |
2024 | |
发表期刊 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
![]() |
ISSN | 2238-7854 |
卷号 | 28页码:2379-2387 |
摘要 | Bimodal-grained Mg-Gd alloys exhibits excellent mechanical strength due to the high solid solubility of Gd element, which facilitates the strong precipitation strengthening. Er element has a higher solid-solubility than Gd in Mg, which may have a great potential in achieving high strength for Mg alloy. In the study, the Mg-15Er alloy with bimodal microstructure of different proportion of two components is fabricated by adjusting the extrusion ratio and microstructures and mechanical properties for the bimodal-structured Mg-15Er alloy are systematically investigated. The results suggest that the ErH2 phase in the Mg-15Er alloys is stable, regardless of the casting state, solid solution state, or extrusion state. Only a small number of dynamic precipitates is formed during extrusion due to the high solid solubility of Er in Mg. Moreover, the formation of dynamic precipitated MgEr3 phase, where the number of Er atoms is greater than that of Mg atoms, also leads to the inability to form highdensity precipitates. The larger extrusion ratio results in higher volume fraction of dynamic recrystallization (from 24 % to 89 %), and larger grain size (from 4.1 mu m to 7.9 mu m). The results show that the ultimate tensile strength decreases from 301 MPa to 235 MPa, and the elongation increases from 12.5 % to 23.5 % with the increase of the extrusion ratio, which are primarily related to the components of unrecrystallized grains and recrystallized grains rather than dynamic precipitates. |
关键词 | Mg -Er binary alloy Extrusion Microstructure ErH 2 phase Mechanical properties |
资助者 | National Natural Science Foundation of China ; Natural Science Foundation of Liaoning Province of China |
DOI | 10.1016/j.jmrt.2023.12.152 |
收录类别 | SCI |
语种 | 英语 |
资助项目 | National Natural Science Foundation of China[52171121] ; National Natural Science Foundation of China[51971151] ; National Natural Science Foundation of China[52201132] ; National Natural Science Foundation of China[52201131] ; National Natural Science Foundation of China[52171055] ; National Natural Science Foundation of China[52371037] ; Natural Science Foundation of Liaoning Province of China[2022-NLTS-18-01] |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:001145596500001 |
出版者 | ELSEVIER |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/183652 |
专题 | 中国科学院金属研究所 |
通讯作者 | Zhang, H.; Wu, D. |
作者单位 | 1.Shenyang Univ Chem Technol, Sch Mech & Power Engn, Shenyang 110142, Peoples R China 2.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Li, R. G.,Zhu, J. X.,Liu, B. S.,et al. Exploring the effect of bimodal microstructure on the mechanical properties of Mg-15Er binary alloy by regulating the extrusion ratio[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2024,28:2379-2387. |
APA | Li, R. G..,Zhu, J. X..,Liu, B. S..,Zhang, H..,Li, S. S..,...&Guo, S. G..(2024).Exploring the effect of bimodal microstructure on the mechanical properties of Mg-15Er binary alloy by regulating the extrusion ratio.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,28,2379-2387. |
MLA | Li, R. G.,et al."Exploring the effect of bimodal microstructure on the mechanical properties of Mg-15Er binary alloy by regulating the extrusion ratio".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 28(2024):2379-2387. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论