Study on Microstructure and Properties of Additive-Manufactured TC4ELI+TC21 Titanium Alloy Gradient Composite Structures

doi:10.3390/coatings14010104

IMR OpenIR

	Study on Microstructure and Properties of Additive-Manufactured TC4ELI+TC21 Titanium Alloy Gradient Composite Structures
	Cui, Can 1; Ji, Haibin 2; Han, Sensen 2,3; Xuan, Minghao 1; Wu, Bin 1; Li, Pengxu 4; Meng, Qingshi 1,3; Murakami, Hideyuki
通讯作者	Han, Sensen(sauhansen@163.com) ; Meng, Qingshi(mengqingshi@hotmail.com)
	2024
发表期刊	COATINGS
卷号	14 期号:1 页码:11
摘要	TC4ELI+TC21 titanium gradient composite structures with direct transition (TD1) and cross transition (TD2) were prepared using laser deposition manufacturing technology. The microstructure of the gradient interface was observed, and the distribution of alloying elements was detected. The tensile properties of the two alloys at room temperature were tested, and the effects of different heat treatment regimens on the microstructure and mechanical properties were investigated. The results show that there is no obvious defect at the gradient interface of the two alloys. Compared with direct transition alloys, the alloying elements of TD2 alloys change less at the interface, the structure of the transition zone is more closely bound, and the elongation is higher. After heat treatment, the alpha phase in the alloy is coarsened, and the alloy elements at the interface are fully diffused, so that the gradient interface of the alloy is eliminated to a certain extent, the tensile strength of the alloy decreases, and elongation increases. The strength and plasticity of the alloy reached their best match at a solution temperature of 930 degrees C.
关键词	gradient composite structures titanium alloy laser deposition manufacturing heat treatment mechanical property
DOI	10.3390/coatings14010104
收录类别	SCI
语种	英语
WOS研究方向	Materials Science ; Physics
WOS类目	Materials Science, Multidisciplinary ; Materials Science, Coatings & Films ; Physics, Applied
WOS记录号	WOS:001148957200001
出版者	MDPI
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/183794
专题	中国科学院金属研究所
通讯作者	Han, Sensen; Meng, Qingshi
作者单位	1.Shenyang Aircraft Design Inst, Shenyang 110001, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China 3.Shenyang Aerosp Univ, Coll Aerosp Engn, Shenyang 110136, Peoples R China 4.South China Univ Technol, Natl Engn Res Ctr Near Net Shape Forming Met Mat, Guangzhou 510640, Peoples R China
推荐引用方式 GB/T 7714	Cui, Can,Ji, Haibin,Han, Sensen,et al. Study on Microstructure and Properties of Additive-Manufactured TC4ELI+TC21 Titanium Alloy Gradient Composite Structures[J]. COATINGS,2024,14(1):11.
APA	Cui, Can.,Ji, Haibin.,Han, Sensen.,Xuan, Minghao.,Wu, Bin.,...&Murakami, Hideyuki.(2024).Study on Microstructure and Properties of Additive-Manufactured TC4ELI+TC21 Titanium Alloy Gradient Composite Structures.COATINGS,14(1),11.
MLA	Cui, Can,et al."Study on Microstructure and Properties of Additive-Manufactured TC4ELI+TC21 Titanium Alloy Gradient Composite Structures".COATINGS 14.1(2024):11.