Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

doi:10.1016/j.jma.2022.06.007

IMR OpenIR

	Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing
	Li, Xihai 1,2; Yan, Hong 1,3; Shan, Zhiwei 4,5; Chen, Rongshi 1
通讯作者	Yan, Hong(hyan@imr.ac.cn) ; Chen, Rongshi(rschen@imr.ac.cn)
	2024-04-01
发表期刊	JOURNAL OF MAGNESIUM AND ALLOYS
ISSN	2213-9567
卷号	12 期号:4 页码:1479-1495
摘要	3% Y 2 O 3p /ZGK200 composites were subjected to unidirectional rolling (UR) and cross rolling (CR) at 400 degrees C and 350 degrees C followed by annealing at 300 degrees C for 1 h. The microstructure, texture and mechanical properties of rolled and annealed composites were systematically studied. The rolled composites exhibited a heterogeneous microstructure, consisting of deformed grains elongated along rolling direction (RD) and Y 2 O 3 particles bands distributed along RD. After annealing, static recrystallization (SRX) occurred and most deformed grains transformed into equiaxed grains. A non -basal texture with two strong T-texture components was obtained after UR while a non -basal elliptical/circle texture with circle multi-peaks was obtained after CR, indicating that rolling path had great influences on texture of the composites. After annealing process, R-texture component disappeared or weakened, as results, a non -basal texture with double peaks tilting from normal direction (ND) to transverse direction (TD) and a more random non -basal texture with circle multi-peaks were obtained for UR and CR composites, respectively. The yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after CR. Some Y 2 O 3 particles broke during rolling. The fracture of the composites was attributed to the existence of Y 2 O 3 clusters and interfacial debonding between particles and matrix during tension, as a result, the ductility was not as superior as matrix alloy. (c) 2022 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University
关键词	Magnesium matrix composites Unidirectional rolling Cross rolling Texture Mechanical properties
资助者	Natural Science Foundation of Shandong Province ; Natural Science Foundation of Liaoning Province ; National Natural Science Foundation of China (NSFC) ; State Key Program of National Natural Science of China ; National Key Research and Development Program of China
DOI	10.1016/j.jma.2022.06.007
收录类别	SCI
语种	英语
资助项目	Natural Science Foundation of Shandong Province[ZR2021ME241] ; Natural Science Foundation of Liaoning Province ; National Natural Science Foundation of China (NSFC)[51701218] ; National Natural Science Foundation of China (NSFC)[51531002] ; State Key Program of National Natural Science of China[2016YFB0301104] ; National Key Research and Development Program of China[2020-MS-004] ; [51601193]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:001230448000001
出版者	KEAI PUBLISHING LTD
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/186365
专题	中国科学院金属研究所
通讯作者	Yan, Hong; Chen, Rongshi
作者单位	1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Peoples R China 3.Shandong Univ Sci & Technol, Sch Mat Sci & Engn, Qingdao 266590, Shandong, Peoples R China 4.Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Ctr Adv Mat Performance Nanoscale CAMP Nano, Xian 710049, Peoples R China 5.Xi An Jiao Tong Univ, Hysitron Appl Res Ctr China HARCC, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
推荐引用方式 GB/T 7714	Li, Xihai,Yan, Hong,Shan, Zhiwei,et al. Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing[J]. JOURNAL OF MAGNESIUM AND ALLOYS,2024,12(4):1479-1495.
APA	Li, Xihai,Yan, Hong,Shan, Zhiwei,&Chen, Rongshi.(2024).Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing.JOURNAL OF MAGNESIUM AND ALLOYS,12(4),1479-1495.
MLA	Li, Xihai,et al."Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing".JOURNAL OF MAGNESIUM AND ALLOYS 12.4(2024):1479-1495.