Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment

doi:10.1016/j.msea.2024.147302

IMR OpenIR

	Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment
	Xu, Siyang 1,2; Wei, Jiaqi 1; Han, Yahui 3; Cao, Dongdong 2; Jiang, Yifu 4; Zhang, Junjia 2; Wang, Xin 1; Yan, Ziwen 5,6; Sun, Shenghui 7; Zang, Ximin 1; Liu, Tongyu 1; Ding, Hua 2
通讯作者	Zang, Ximin(zangxm@sut.edu.cn) ; Liu, Tongyu(18642618880@126.com) ; Ding, Hua(dingh@smm.neu.edu.cn)
	2024-11-01
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	916 页码:11
摘要	Cu-9Ni-6Sn-0.2Nb alloys were prepared by a series of preparation-process including hot rolling, solution treatment, cold rolling, annealing treatment, and aging treatment. As the results indicate, the annealing treatment provided a significant role on improving aging stability of the alloys, it obviously decreased volume fraction of DP nuclear sites as well as hinder the growth of DP colony by decreasing the degree of GND and increasing the volume fraction of Sigma 3(n) grain boundaries. Besides, annealing treatment makes Cu-9Ni-6Sn-0.2Nb alloy extend aging window, and the yield strength and Vickers hardness could nearly drop a bit after peak aging compare to the cold-rolled one. Strengthening mechanism has been quantitatively established, indicating that the respective contribution of precipitation strengthening (dominated by gamma ' phases) plays a dominant role in the strength enhancement of the annealed alloy.
关键词	Cu-9Ni-6Sn alloy Discontinuous precipitation Aging stability Softening resistance
资助者	National Natural Science Foundation of China ; Fundamental Research Funds for the Central Univer-sities ; Natural Science Foundation of Liaoning Province
DOI	10.1016/j.msea.2024.147302
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[52471155] ; Fundamental Research Funds for the Central Univer-sities[N2302009] ; Natural Science Foundation of Liaoning Province[2023-MSBA-053]
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:001328420100001
出版者	ELSEVIER SCIENCE SA
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/190415
专题	中国科学院金属研究所
通讯作者	Zang, Ximin; Liu, Tongyu; Ding, Hua
作者单位	1.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China 3.Weichai Power Co Ltd, Weifang 261061, Peoples R China 4.Shenyang Inst Engn, Sch Mech Engn, Shenyang 110136, Peoples R China 5.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 6.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 7.Xian Rare Met Mat Inst Co Ltd, Xian 710016, Peoples R China
推荐引用方式 GB/T 7714	Xu, Siyang,Wei, Jiaqi,Han, Yahui,et al. Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2024,916:11.
APA	Xu, Siyang.,Wei, Jiaqi.,Han, Yahui.,Cao, Dongdong.,Jiang, Yifu.,...&Ding, Hua.(2024).Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,916,11.
MLA	Xu, Siyang,et al."Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 916(2024):11.