| SLM Magnesium Alloy Micro-Arc Oxidation Coating | |
| Yue, Xuejie1; Xu, Kangning2; Wang, Shuyi2; Liu, Hengyan2; Guo, Shiyue3; Zhao, Rusheng4; Xu, Gaopeng2; Wang, Hao5; Yue, Xuezheng2 | |
| 通讯作者 | Yue, Xuezheng(usst-yzyz@usst.edu.cn) |
| 2024-10-01 | |
| 发表期刊 | MATERIALS
 |
| 卷号 | 17期号:20页码:14 |
| 摘要 | In this study, we utilized Selective Laser Melting (SLM) technology to fabricate a magnesium alloy, and subsequently subject it to micro-arc oxidation treatment. We analyzed and compared the microstructure, elemental distribution, wetting angle, and corrosion resistance of the SLM magnesium alloy both before and after the micro-arc oxidation process. The findings indicate that the SLM magnesium alloy exhibits surface porosity defects ranging from 2% to 3.2%, which significantly influence the morphology and functionality of the resulting film layer formed during the micro-arc oxidation process. These defects manifest as pores on the surface, leading to an uneven distribution of micropores with varying sizes across the layer. The surface roughness of the 3D-printed magnesium alloy exhibits a high roughness value of 180 nanometers. The phosphorus (P) content is lower within the film layer compared to the surface, suggesting that the Mg3(PO4)2 phase predominantly resides on the surface, whereas the interior is primarily composed of MgO. The micro-arc oxidation process enhances the hydrophilicity and corrosion resistance of the SLM magnesium alloy, thereby potentially endowing it with bioactivity. Additionally, the increased surface roughness post-treatment promotes cell proliferation. However, certain inherent defects present in the SLM magnesium alloy samples negatively impact the improvement of their corrosion resistance. |
| 关键词 | selected laser melting magnesium alloys micro-arc oxidation wetting angle corrosion resistance |
| 资助者 | National Natural Science Foundation of China ; University of Shanghai for science and technology for Postgraduate Teaching Achievement Award Program |
| DOI | 10.3390/ma17204988 |
| 收录类别 | SCI |
| 语种 | 英语 |
| 资助项目 | National Natural Science Foundation of China ; University of Shanghai for science and technology for Postgraduate Teaching Achievement Award Program[JXCG202414] ; [52201083] |
| WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering ; Physics |
| WOS类目 | Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Physics, Applied ; Physics, Condensed Matter |
| WOS记录号 | WOS:001341544100001 |
| 出版者 | MDPI |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/190941 |
| 专题 | 中国科学院金属研究所 |
| 通讯作者 | Yue, Xuezheng |
| 作者单位 | 1.Xinxiang Univ, Sch Civil Engn & Architecture, Xinxiang 453000, Peoples R China 2.Univ Shanghai Sci & Technol, Dept Mat Sci & Chem, Shanghai 200093, Peoples R China 3.Wuhan Univ Technol, Hubei Longzhong Lab, Xiangyang 441000, Peoples R China 4.Tokyo Metropolitan Univ, Tokyo 1920397, Japan 5.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yue, Xuejie,Xu, Kangning,Wang, Shuyi,et al. SLM Magnesium Alloy Micro-Arc Oxidation Coating[J]. MATERIALS,2024,17(20):14. |
| APA | Yue, Xuejie.,Xu, Kangning.,Wang, Shuyi.,Liu, Hengyan.,Guo, Shiyue.,...&Yue, Xuezheng.(2024).SLM Magnesium Alloy Micro-Arc Oxidation Coating.MATERIALS,17(20),14. |
| MLA | Yue, Xuejie,et al."SLM Magnesium Alloy Micro-Arc Oxidation Coating".MATERIALS 17.20(2024):14. |
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论