IMR OpenIR
TA12钛合金板材成形性能试验
方波; 程明; 陈仲强; 刘军和; 刘艳; 冯贞伟; 宋玺玉; 魏明霞; 胡井祥
2011-07-10
Source Publication精密成形工程
Issue4Pages:1-3
Abstract对航空用高温TA12钛合金板材在室温和高温条件下进行杯突和扩孔试验。结果表明:室温条件下,TA12钛合金板材的杯突值IE为3.0 mm左右,扩孔率仅为3%左右;在880℃条件下,杯突值IE增加到4.4 mm,扩孔率提高到13%左右。说明TA12钛合金板材的室温胀形能力和翻边成形性能较差,在高温条件下能够有一定的改善。
description.department中航工业沈阳黎明航空发动机(集团)有限责任公司;中国科学院金属研究所;中国人民解放军驻黎明公司军事代表室;
Keyword钛合金 成形性能 杯突试验 扩孔试验
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/23396
Collection中国科学院金属研究所
Recommended Citation
GB/T 7714
方波,程明,陈仲强,等. TA12钛合金板材成形性能试验[J]. 精密成形工程,2011(4):1-3.
APA 方波.,程明.,陈仲强.,刘军和.,刘艳.,...&胡井祥.(2011).TA12钛合金板材成形性能试验.精密成形工程(4),1-3.
MLA 方波,et al."TA12钛合金板材成形性能试验".精密成形工程 .4(2011):1-3.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[方波]'s Articles
[程明]'s Articles
[陈仲强]'s Articles
Baidu academic
Similar articles in Baidu academic
[方波]'s Articles
[程明]'s Articles
[陈仲强]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[方波]'s Articles
[程明]'s Articles
[陈仲强]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.