| Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate | |
| Z. K. Chang; X. S. Wan; Z. L. Pei; J. Gong; C. Sun | |
| 2011 | |
| 发表期刊 | Surface & Coatings Technology
 |
| ISSN | 0257-8972 |
| 卷号 | 205期号:19页码:4690-4696 |
| 摘要 | CrN coatings have been grown by arc ion plating (AIP) onto Ti6Al4V alloy substrate at various nitrogen pressures (P(N2)). The goals of this investigation are to study the influence of nitrogen pressure content on the composition, structure and mechanical properties of AIP CrN coatings, as well as their tribological properties. With an increase of P(N2), the main phases in the coatings changed from CrN + Cr(2)N + Cr to CrN, and the texture of CrN was transformed from CrN (111)-oriented to (220)-oriented. Furthermore, the multi-layers including a metal Cr layer, a Cr(2)N layer and a CrN layer were observed by cross-sectional TEM (XTEM), besides an "unbalanced" state transition layer at the interface of CrN/substrate which was analyzed by nucleation thermodynamics subsequently. An increase in nitrogen pressure also resulted in a change of micro-hardness due to the variation in composition and structure. Finally, the tribological properties of the Ti6Al4V substrate and the CrN/Ti6Al4V coating system have also been explored, which shows that CrN coatings can act as good wear resistance layer for Ti6Al4V substrate. (C) 2011 Elsevier B.V. All rights reserved. |
| 部门归属 | [chang, z. k.; wan, x. s.; pei, z. l.; gong, j.; sun, c.] chinese acad sci, state key lab corros & protect, inst met res, shenyang 110016, peoples r china.;sun, c (reprint author), chinese acad sci, state key lab corros & protect, inst met res, 72 wenhua rd, shenyang 110016, peoples r china;csun@imr.ac.cn |
| 关键词 | Knoop Hardness Test Interfaces Wear Arc Ion Plating Crn Coatings Ti6al4v Alloy Nitride Thin-films Ti-6al-4v Alloy Hard Coatings Wear Behavior Tribological Properties Residual-stress Sliding Contact Bias Voltage n Coatings Surface |
| URL | 查看原文 |
| WOS记录号 | WOS:000291897900050 |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/30249 |
| 专题 | 中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Z. K. Chang,X. S. Wan,Z. L. Pei,et al. Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate[J]. Surface & Coatings Technology,2011,205(19):4690-4696. |
| APA | Z. K. Chang,X. S. Wan,Z. L. Pei,J. Gong,&C. Sun.(2011).Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate.Surface & Coatings Technology,205(19),4690-4696. |
| MLA | Z. K. Chang,et al."Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate".Surface & Coatings Technology 205.19(2011):4690-4696. |
| 条目包含的文件 | ||||||
| 文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
| Microstructure and m（1755KB） | 开放获取 | -- | ||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论