Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints

IMR OpenIR

	Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints
	P. Xue; D. R. Ni; D. Wang; B. L. Xiao; Z. Y. Ma
	2011
发表期刊	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
ISSN	0921-5093
卷号	528 期号:13-14 页码:4683-4689
摘要	Butt joints of 1060 aluminum alloy and commercially pure copper were produced by friction stir welding (FSW) and the effect of welding parameters on surface morphology, interface microstructure and mechanical properties was investigated. The experimental results revealed that sound defect-free joints could be obtained under larger pin offsets when the hard Cu plate was fixed at the advancing side. Good tensile properties were achieved at higher rotation rates and proper pin offsets of 2 and 2.5 mm; further, the joint produced at 600 rpm with a pin offset of 2 mm could be bended to 180 degrees without fracture. The mechanical properties of the FSW Al-Cu joints were related closely to the interface microstructure between the Al matrix and Cu bulk. A thin, uniform and continuous intermetallic compound (IMC) layer at the Al-Cu butted interface was necessary for achieving sound FSW Al-Cu joints. Stacking layered structure developed at the Al-Cu interface under higher rotation rates, and crack initiated easily in this case, resulting in the poor mechanical properties. (C) 2011 Elsevier B.V. All rights reserved.
部门归属	[xue, p.; ni, d. r.; wang, d.; xiao, b. l.; ma, z. y.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china.;ma, zy (reprint author), chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china;zyma@imr.ac.cn
关键词	Friction Stir Welding Dissimilar Joint Intermetallic Compounds Microstructure Mechanical Properties Intermetallic Compounds Aluminum Alloy Weldability Location Steel Fsw
URL	查看原文
WOS记录号	WOS:000290004200054
引用统计	被引频次：324[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/30804
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	P. Xue,D. R. Ni,D. Wang,et al. Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2011,528(13-14):4683-4689.
APA	P. Xue,D. R. Ni,D. Wang,B. L. Xiao,&Z. Y. Ma.(2011).Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,528(13-14),4683-4689.
MLA	P. Xue,et al."Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 528.13-14(2011):4683-4689.