| Effect of Sintering Temperature on the Texturing Behavior of NaCo(2)O(4-delta) Synthesized by Urea Auto-Combustion Method | |
| Y. Zhang; W. Wei; Y. Liu; B. P. Zhu; P. Huang; Z. Y. Wang; Z. P. Zhou; W. F. Tang; J. Shi; R. Xiong | |
| 2009 | |
| Source Publication | Journal of Materials Science & Technology
 |
| ISSN | 1005-0302 |
| Volume | 25Issue:6Pages:742-744 |
| Abstract | Polycrystalline NaCo(2)O(4-delta) materials were prepared using the urea auto-combustion method. The reaction process and crystal growth were investigated through X-ray diffraction (XRD), thermogravimetry-differential thermal analysis (TG-DTA), and Fourier transform infrared spectrometry (FTIR). The results indicate that the formation temperature of NaCo(2)O(4-delta) is about 620 degrees C, which is lower than that for solid-state reaction. XRD results show that the texturing along c-axis occurred as the powders calcined at 700 degrees C were pressed into pellets with subsequently sintering, and the degree of such texturing increases with increasing sintering temperature. Surface morphologies by scanning electron microscopy (SEM) also indicate that the texturing show dependence on sintering temperature. The grains on the surfaces of the pellets sintered at 750 and 850 degrees C have some growth trend along a-b planes, while the grains on the surface of the pellet sintered at 950 degrees C show an obvious growth trend toward c-axis. |
| description.department | [zhang, yue; wei, wei; liu, yong; zhu, benpeng; huang, ping; wang, ziyu; zhou, zhongpo; tang, wufeng; shi, jing; xiong, rui] wuhan univ, dept phys, minist educ, wuhan 430072, peoples r china. [zhang, yue; wei, wei; liu, yong; zhu, benpeng; huang, ping; wang, ziyu; zhou, zhongpo; tang, wufeng; shi, jing; xiong, rui] wuhan univ, key lab acoust & photon mat & devices, minist educ, wuhan 430072, peoples r china. [shi, jing] acad sinica, int ctr mat phys, shenyang 110015, peoples r china.;xiong, r (reprint author), wuhan univ, dept phys, minist educ, wuhan 430072, peoples r china;xiongrui@whu.edu.cn |
| Keyword | Crystal Growth Heat Treatment Sintering Surfaces X-ray Techniques |
| URL | 查看原文 |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/32582 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Y. Zhang,W. Wei,Y. Liu,et al. Effect of Sintering Temperature on the Texturing Behavior of NaCo(2)O(4-delta) Synthesized by Urea Auto-Combustion Method[J]. Journal of Materials Science & Technology,2009,25(6):742-744. |
| APA | Y. Zhang.,W. Wei.,Y. Liu.,B. P. Zhu.,P. Huang.,...&R. Xiong.(2009).Effect of Sintering Temperature on the Texturing Behavior of NaCo(2)O(4-delta) Synthesized by Urea Auto-Combustion Method.Journal of Materials Science & Technology,25(6),742-744. |
| MLA | Y. Zhang,et al."Effect of Sintering Temperature on the Texturing Behavior of NaCo(2)O(4-delta) Synthesized by Urea Auto-Combustion Method".Journal of Materials Science & Technology 25.6(2009):742-744. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| 2350.pdf（436KB） | 开放获取 | -- | ||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment