Fabrication and characterization of large isotropic pyrolytic carbons

IMR OpenIR

	Fabrication and characterization of large isotropic pyrolytic carbons
	J. F. Wu; S. Bai; S. H. Liu; H. J. Xu; H. M. Cheng
	2006
发表期刊	New Carbon Materials
ISSN	1007-8827
卷号	21 期号:2 页码:119-124
摘要	Large isotropic pyrolytic carbon rings were fabricated by a steady fluidized bed deposition apparatus with a rotating substrate. The microstructure of the isotropic pyrolytic carbons obtained was investigated by polarized light microscopy, SEM, TEM and XRD. Their mechanical properties were also studied. Observations using polarized light microscopy and SEM show that the microstructure is homogeneous and there is a small amount of closed porosity inside. TEM observations show that this material is mainly made up of fine turbostratic carbon structures. Mechanical tests show that the Young's modulus, microhardness, flexural strength and compressive strength of the carbons are higher than those of traditional carbon materials.
部门归属	chinese acad sci, shenyang natl lab mat sci, met res inst, shenyang 110016, peoples r china.;wu, jf (reprint author), chinese acad sci, shenyang natl lab mat sci, met res inst, shenyang 110016, peoples r china;jfwu@imr.ac.cn
关键词	Pyrolytic Carbon Isotropic Fabrication Microstructure Deposition
URL	查看原文
WOS记录号	WOS:000238725600005
引用统计	被引频次：12[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/34569
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	J. F. Wu,S. Bai,S. H. Liu,et al. Fabrication and characterization of large isotropic pyrolytic carbons[J]. New Carbon Materials,2006,21(2):119-124.
APA	J. F. Wu,S. Bai,S. H. Liu,H. J. Xu,&H. M. Cheng.(2006).Fabrication and characterization of large isotropic pyrolytic carbons.New Carbon Materials,21(2),119-124.
MLA	J. F. Wu,et al."Fabrication and characterization of large isotropic pyrolytic carbons".New Carbon Materials 21.2(2006):119-124.