Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process | |
X. S. Xin; Z. Lu; X. Q. Huang; X. Q. Sha; Y. H. Zhang; K. F. Chen; N. Ai; R. B. Zhu; W. H. Su | |
2006 | |
发表期刊 | Journal of Power Sources
![]() |
ISSN | 0378-7753 |
卷号 | 160期号:2页码:1221-1224 |
摘要 | Dense yttria-stabilized zirconia (YSZ) electrolyte films were successfully fabricated onto anode substrates using a modified dry pressing process. The film thickness was uniform, and could be readily controlled by the mass of the nanocrystalline YSZ powders. The electrolyte films adhered well to the anode substrates by controlling the anode composition. An anode-supported solid oxide fuel cell (SOFC) with a dense YSZ electrolyte film of 8 mu m in thickness was operated at temperatures from 700 to 800 degrees C using humidified (3 vol% H2O) hydrogen as fuel and air as oxidant. An open circuit voltage of 1.06 V and a maximum power density of 791 mW cm(-2) were achieved at 800 degrees C. The results indicate that the gas permeation through the electrolyte film was negligible, and that good performance can be obtained by this simple and cost-effective technique which can significantly reduce the fabrication cost of SOFCs. (c) 2006 Elsevier B.V. All rights reserved. |
部门归属 | harbin inst technol, ctr condensed matter sci & technol, harbin 150001, peoples r china. jilin univ, dept condensed matter phys, changchun 130023, peoples r china. acad sinica, int ctr mat phys, shenyang 110015, peoples r china.;su, wh (reprint author), harbin inst technol, ctr condensed matter sci & technol, harbin 150001, peoples r china;xinxianshuang@sohu.com suwenhui@hit.edu.cn |
关键词 | Solid Oxide Fuel Cell Dry Pressing Electrolyte Thin Film Yttria-stabilized Zirconia Temperature |
URL | 查看原文 |
WOS记录号 | WOS:000241411600060 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/34612 |
专题 | 中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | X. S. Xin,Z. Lu,X. Q. Huang,et al. Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process[J]. Journal of Power Sources,2006,160(2):1221-1224. |
APA | X. S. Xin.,Z. Lu.,X. Q. Huang.,X. Q. Sha.,Y. H. Zhang.,...&W. H. Su.(2006).Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process.Journal of Power Sources,160(2),1221-1224. |
MLA | X. S. Xin,et al."Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process".Journal of Power Sources 160.2(2006):1221-1224. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论