| The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters | |
| G. X. Sui; S. C. Wong; R. Yang; C. Y. Yue | |
| 2005 | |
| Source Publication | Composites Science and Technology
 |
| ISSN | 0266-3538 |
| Volume | 65Issue:2Pages:221-229 |
| Abstract | Short glass fiber-reinforced nylon 6,6 with and without rubbery inclusions were injection molded into standard specimens. The mechanical properties and the residual fiber length distribution were measured. The macro-to-micro model proposed by Bowyer and Bader [J. Mater. Sci., 7 (1972) 1315] was used to determine the interfacial shear strength (IFSS). The IFSS in the toughened nylon 6,6-based composites was found to be superior to that in the untoughened nylon 6,6-based composites. This indicates that the presence of rubbery phase in the composite system contributed to the interfacial bonding between nylon 6,6 and glass fibers (GF). Back-scattered electron imaging taken on a plane perpendicular to the mold filling direction for fiber-reinforced toughened nylon 6,6 showed that the rubbery phase adhered to the GF surface. This morphological feature was regarded as a main factor responsible for the improvement of IFSS in the reinforced toughened nylon 6,6 composites. (C) 2004 Published by Elsevier Ltd. |
| description.department | chinese acad sci, inst met res, shenyang 110016, peoples r china. n dakota state univ, dept mech engn & appl mech, fargo, nd 58105 usa. nanyang technol univ, sch mech & prod engn, singapore 639798, singapore.;sui, gx (reprint author), chinese acad sci, inst met res, 72 wenhua rd, shenyang 110016, peoples r china;gxsui@imr.ac.cn |
| Keyword | Glass Fiber Nylon 6 6 Reinforced Polymers Glass Strength Behavior Microstructures Thermoplastics |
| URL | 查看原文 |
| WOS ID | WOS:000225541700006 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/35037 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | G. X. Sui,S. C. Wong,R. Yang,et al. The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters[J]. Composites Science and Technology,2005,65(2):221-229. |
| APA | G. X. Sui,S. C. Wong,R. Yang,&C. Y. Yue.(2005).The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters.Composites Science and Technology,65(2),221-229. |
| MLA | G. X. Sui,et al."The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters".Composites Science and Technology 65.2(2005):221-229. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment