| A one-cycle training technique for copper-based shape memory alloys | |
| J. Fernandez; X. M. Zhang; J. M. Guilemany | |
| 2003 | |
| Source Publication | Journal of Materials Processing Technology
 |
| ISSN | 0924-0136 |
| Volume | 139Issue:1-3Pages:117-119 |
| Abstract | Shape memory alloys have been used in the industrial and medical fields due to their shape memory effect (SME), pseudoelasticity and two-way shape memory effect (TWSME). With TWSME, the shape memory alloy (SMA) can changes its shape during heating and recover its shape during cooling. This recoverable property can be thermally cycled over 10(5) times, but TWSME is not an intrinsic property of shape memory alloys: it should be trained by multiple thermomechanical cycling. The present authors have developed a one-cycle training technique to obtain TWSME for Cu-based alloys. This method is usually called the stabilized stress-induced martensite (SSIM) training method. With the SSIM training in Cu-based alloys, many small gamma precipitates were induced with a large strain field oriented in a same direction in the austenite. It was considered that these oriented gamma precipitates in the austenite contribute their strain field to thermoclastic martensite transformation during cooling. When the alloy is heated again, during reverse transformation the strain field around the gamma precipitates can be recovered again. In this way, with only one-cycle training, the Cu-based SMA can obtain TWSME. (C) 2003 Elsevier Science B.V. All rights reserved. |
| description.department | univ barcelona, e-08028 barcelona, spain. chinese acad sci, inst met res, shenyang 110016, peoples r china.;zhang, xm (reprint author), univ barcelona, e-08028 barcelona, spain |
| Keyword | Shape Memory Alloy Cu-based Alloy Two-way Shape Memory Effect Training Method Precipitation Stress-induced Martensite Zn-al Alloys |
| URL | 查看原文 |
| WOS ID | WOS:000184438800019 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/35829 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | J. Fernandez,X. M. Zhang,J. M. Guilemany. A one-cycle training technique for copper-based shape memory alloys[J]. Journal of Materials Processing Technology,2003,139(1-3):117-119. |
| APA | J. Fernandez,X. M. Zhang,&J. M. Guilemany.(2003).A one-cycle training technique for copper-based shape memory alloys.Journal of Materials Processing Technology,139(1-3),117-119. |
| MLA | J. Fernandez,et al."A one-cycle training technique for copper-based shape memory alloys".Journal of Materials Processing Technology 139.1-3(2003):117-119. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment