Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method; Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method | |
T. M. He; Z. Lu; L. Pei; X. Q. Huang; Z. G. Liu; W. H. Su | |
2002 ; 2002 | |
Source Publication | Journal of Alloys and Compounds
![]() ![]() |
ISSN | 0925-8388 ; 0925-8388 |
Volume | 333Issue:1-2Pages:231-236 |
Abstract | Yttria (8 mol %)-stabilized zirconia electrolyte tubes with thin walls, which are 266 mm in length, 0,4-0.9 mm in thickness, and 96.7% in relative density, were prepared with an improved slip casting method. The microstructure and electrical properties of the samples sintered at different temperatures were studied using SEM and a.c. impedance spectroscopy. The effects of sintered density, grain and grain boundary on the electrical properties of samples were analyzed. The results show that the densification of samples increases gradually with increasing sintering temperatures. The microstructure of samples strongly influences their electrical properties, and with increasing sintered density, the electrical properties of samples are enhanced. The ionic conductivity of grain and grain boundary is improved as the sintering temperatures increase. The grain boundary resistance of samples sintered at 1650degreesC is higher than that of samples sintered at 1600degreesC. Better sinterability of samples was obtained at a sintering temperature of 1650degreesC. (C) 2002 Elsevier Science B.V. All rights reserved.; Yttria (8 mol %)-stabilized zirconia electrolyte tubes with thin walls, which are 266 mm in length, 0,4-0.9 mm in thickness, and 96.7% in relative density, were prepared with an improved slip casting method. The microstructure and electrical properties of the samples sintered at different temperatures were studied using SEM and a.c. impedance spectroscopy. The effects of sintered density, grain and grain boundary on the electrical properties of samples were analyzed. The results show that the densification of samples increases gradually with increasing sintering temperatures. The microstructure of samples strongly influences their electrical properties, and with increasing sintered density, the electrical properties of samples are enhanced. The ionic conductivity of grain and grain boundary is improved as the sintering temperatures increase. The grain boundary resistance of samples sintered at 1650degreesC is higher than that of samples sintered at 1600degreesC. Better sinterability of samples was obtained at a sintering temperature of 1650degreesC. (C) 2002 Elsevier Science B.V. All rights reserved. |
description.department | jilin univ, dept phys, state key lab inorgan synth & preparat chem, changchun 130023, peoples r china. harbin inst technol, ctr condensed matter sci & technol, harbin 150001, peoples r china. acad sinica, int ctr mat phys, shenyang 110015, peoples r china.;he, tm (reprint author), jilin univ, dept phys, state key lab inorgan synth & preparat chem, changchun 130023, peoples r china ; jilin univ, dept phys, state key lab inorgan synth & preparat chem, changchun 130023, peoples r china. harbin inst technol, ctr condensed matter sci & technol, harbin 150001, peoples r china. acad sinica, int ctr mat phys, shenyang 110015, peoples r china.;he, tm (reprint author), jilin univ, dept phys, state key lab inorgan synth & preparat chem, changchun 130023, peoples r china |
Keyword | Oxide Materials Oxide Materials Electrolyte Materials Electrolyte Materials Casting Casting Electrical Transport Electrical Transport Ionic Conduction Ionic Conduction Fuel-cells Fuel-cells Conductivity Conductivity Microstructure Microstructure Impedance Impedance Additions Additions Powders Powders |
URL | 查看原文 ; 查看原文 |
WOS ID | WOS:000173481300039 ; WOS:000173481300039 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/36288 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | T. M. He,Z. Lu,L. Pei,et al. Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method, Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method[J]. Journal of Alloys and Compounds, Journal of Alloys and Compounds,2002, 2002,333, 333(1-2):231-236, 231-236. |
APA | T. M. He,Z. Lu,L. Pei,X. Q. Huang,Z. G. Liu,&W. H. Su.(2002).Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method.Journal of Alloys and Compounds,333(1-2),231-236. |
MLA | T. M. He,et al."Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method".Journal of Alloys and Compounds 333.1-2(2002):231-236. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment