Air oxidation at 600-800(omicron)C of two nanophase co-50wt% Cu alloys prepared by mechanical alloying

IMR OpenIR

	Air oxidation at 600-800(omicron)C of two nanophase co-50wt% Cu alloys prepared by mechanical alloying
	J. Song; G. Farne; Y. Niu; F. Gesmundo; P. Matteazzi; G. Randi
	2001
发表期刊	High Temperature Materials and Processes
ISSN	0334-6455
卷号	20 期号:1 页码:25-37
摘要	The air oxidation of two two-phase cobalt-copper alloys prepared by mechanical alloying, containing approximately 50 wt%Cu but presenting two different grain sizes, has been studied at 600-800 degreesC. The two alloys have been obtained by sintering a mixture of nanophase Co-Cu powders by hot isostatic pressing followed or not by an annealing at 800 degreesC for 20 hr. Both alloys formed composite scales containing complex mixtures of copper and cobalt oxides associated with an internal oxidation of cobalt in a copper matrix. The kinetics of oxidation were close to parabolic at 600 and 700 degreesC, but rather irregular at 800 degreesC. Moreover, the oxidation rates of the two alloys were similar at 600 degreesC, but the annealed alloy corroded more slowly at 700 and 800 degreesC. On the whole, the scaling behavior of the two nanophase alloys was rather similar to that of an ahoy of the same composition prepared by conventional casting techniques and thus presenting a much larger grain size. Thus, the very small grain size of the present alloys is not yet sufficient to produce an exclusive external oxidation of cobalt, as might be expected as a result of a possible faster diffusion of cobalt along grain boundaries in the alloy. The presence of large convolutions in the outermost CuO layer and the extensive spallation of the underlying Cu2O layer are attributed to the accumulation of mechanical stresses in the scale due to the penetration of oxygen along the grain boundaries in the scale and to a reduction of the sample size associated with the increase in the alloy grain size with time during oxidation.
部门归属	acad sinica, inst corros & protect met, state key lab corros & protect, shenyang 110015, peoples r china. univ genoa, dipartimento ingn chim, i-16129 genoa, italy. univ udine, dipartimento sci & tecnol chim, i-33100 udine, italy.;niu, y (reprint author), univ genoa, dipartimento ingn chim, fiera mare,pad d, i-16129 genoa, italy
关键词	Co-cu Mechanical Alloying Two-phase High Temperature Oxidation 2-phase Binary-alloys High-temperature Oxidation Possible Scaling Modes High Oxidant Pressures Grain-size Internal Oxidation Protective Scales y Alloys Growth Diffusion
URL	查看原文
WOS记录号	WOS:000169051200004
引用统计	被引频次：1[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/36803
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	J. Song,G. Farne,Y. Niu,et al. Air oxidation at 600-800(omicron)C of two nanophase co-50wt% Cu alloys prepared by mechanical alloying[J]. High Temperature Materials and Processes,2001,20(1):25-37.
APA	J. Song,G. Farne,Y. Niu,F. Gesmundo,P. Matteazzi,&G. Randi.(2001).Air oxidation at 600-800(omicron)C of two nanophase co-50wt% Cu alloys prepared by mechanical alloying.High Temperature Materials and Processes,20(1),25-37.
MLA	J. Song,et al."Air oxidation at 600-800(omicron)C of two nanophase co-50wt% Cu alloys prepared by mechanical alloying".High Temperature Materials and Processes 20.1(2001):25-37.