Modification of a rapidly solidified hydrogen storage electrode alloy by ball-milling with Co3Mo | |
K. Yang; D. M. Chen; L. A. Chen; H. F. Zhang; W. S. Sun; Y. Y. Li | |
1999 | |
发表期刊 | Journal of Alloys and Compounds
![]() |
ISSN | 0925-8388 |
卷号 | 293页码:670-674 |
摘要 | Rapidly solidified hydrogen storage alloys were reported to have good cycle life, but they are very difficult to activate, especially for AB(2) type alloys. In this study, a Zr0.9Ti0.1 (Ni0.57V0.1Mn0.28Co0.05)(2.1) alloy was prepared by melt-spinning followed by ball-milling with Co3Mo additive in order to improve its kinetic characteristics. The experimental results showed that the alloy exhibited a much improved activation performance as well as electrochemical capacity after 2 hours milling. Cyclic voltammetry and electrochemical impedance experiments also showed that ball-milling of the alloy with Co3Mo could improve the surface activation property to a great extent. This can be attributed to the catalytic effect of Co3Mo, which had a much closer contact to the alloy powders after ball-milling, on the hydrogen oxidation. However, long time milling could decrease the capacity gradually due to the further amorphization of the ahoy. (C) 1999 Published by Elsevier Science S.A, All rights reserved. |
部门归属 | chinese acad sci, inst met res, state key lab rapidly solidified nonequilibrium a, shenyang 110015, peoples r china.;yang, k (reprint author), chinese acad sci, inst met res, state key lab rapidly solidified nonequilibrium a, shenyang 110015, peoples r china |
关键词 | Metal-hydride Electrodes Ni-mh Batteries Ball-milling Treatment Metal Hydride Battery Powder |
URL | 查看原文 |
WOS记录号 | WOS:000084065500124 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/37546 |
专题 | 中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | K. Yang,D. M. Chen,L. A. Chen,et al. Modification of a rapidly solidified hydrogen storage electrode alloy by ball-milling with Co3Mo[J]. Journal of Alloys and Compounds,1999,293:670-674. |
APA | K. Yang,D. M. Chen,L. A. Chen,H. F. Zhang,W. S. Sun,&Y. Y. Li.(1999).Modification of a rapidly solidified hydrogen storage electrode alloy by ball-milling with Co3Mo.Journal of Alloys and Compounds,293,670-674. |
MLA | K. Yang,et al."Modification of a rapidly solidified hydrogen storage electrode alloy by ball-milling with Co3Mo".Journal of Alloys and Compounds 293(1999):670-674. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论