Synthesis of zirconia-nickel cermets by a powder metallurgical technique

IMR OpenIR

	Synthesis of zirconia-nickel cermets by a powder metallurgical technique
	W. Y. Hu; H. R. Guan; X. F. Sun; S. Z. Li
	1998
发表期刊	Materials and Manufacturing Processes
ISSN	1042-6914
卷号	13 期号:2 页码:229-240
摘要	A powder processing technique is developed for the synthesis of zirconia-nickel cermets, which have similar microstructures as those prepared by plasma spraying using the same starting powders, in order to measure their thermophysical properties. The processing parameters are determined: pressing at 764 MPa and sintering at 1270 degrees C for 50 minutes. The results show that yield strength and relative scratch hardness increase with increasing ceramic content and decrease after attaining their maximum values with further increasing ceramic content.
部门归属	hunan univ, dept appl phys, changsha 410082, peoples r china. acad sinica, inst met res, shenyang 110015, peoples r china.
关键词	Coatings Behavior
URL	查看原文
WOS记录号	WOS:000073491100005
引用统计	被引频次：2[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/37671
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	W. Y. Hu,H. R. Guan,X. F. Sun,et al. Synthesis of zirconia-nickel cermets by a powder metallurgical technique[J]. Materials and Manufacturing Processes,1998,13(2):229-240.
APA	W. Y. Hu,H. R. Guan,X. F. Sun,&S. Z. Li.(1998).Synthesis of zirconia-nickel cermets by a powder metallurgical technique.Materials and Manufacturing Processes,13(2),229-240.
MLA	W. Y. Hu,et al."Synthesis of zirconia-nickel cermets by a powder metallurgical technique".Materials and Manufacturing Processes 13.2(1998):229-240.