2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL

IMR OpenIR

	2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL
	H. F. Wang; X. Yang; H. Bangert; P. Torzicky; L. Wen
	1992
发表期刊	Thin Solid Films
ISSN	0040-6090
卷号	214 期号:1 页码:68-73
摘要	The finite element simulation uses an indenting wedge (apex angle, 136-degrees) as a two-dimensional approximation of the actual Vickers pyramid. The model assumes isotropic properties for the layer and substrate materials and an elastoplastic behaviour with a work-hardening characteristic. The stress distribution and the plastic deformation zone inside the layer as well as across the interface between film and substrate were calculated, Load-dependent Vickers hardness numbers obtained on TiN coatings, 8-mu-m thick on high speed steel, were compared with the finite element prediction for the wedge-shaped indenter. In the experiments results for the composite microhardness, the cross-sectional morphology of the residual impression and information on the quality of the interface adhesion were obtained. By the comparison of calculated and experimental hardness numbers, the yield stress of the TiN layer was found to be approximately 6 GPa.
部门归属	vienna tech univ,inst strength mat,a-1040 vienna,austria. acad sinica,inst met res,shenyang,peoples r china.;wang, hf (reprint author), vienna tech univ,inst appl & tech phys,a-1040 vienna,austria
关键词	Surface
URL	查看原文
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/39303
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	H. F. Wang,X. Yang,H. Bangert,et al. 2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL[J]. Thin Solid Films,1992,214(1):68-73.
APA	H. F. Wang,X. Yang,H. Bangert,P. Torzicky,&L. Wen.(1992).2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL.Thin Solid Films,214(1),68-73.
MLA	H. F. Wang,et al."2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL".Thin Solid Films 214.1(1992):68-73.