| Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy | |
| B. Q. Shi; R. S. Chen; W. Ke | |
| 2012 | |
| Source Publication | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| ISSN | 0921-5093 |
| Volume | 546Pages:323-327 |
| Abstract | AZ80 cast magnesium alloy has been fabricated by a combination of ECAE (equal channel angular extrusion) and subsequent forging processing to investigate the effect of second forging processing on the evolution of microstructure, texture and tensile properties. The AZ80 alloy produced by this process exhibited the ultimate tensile strength (UTS) of 434 MPa, yield strength (VS) of 347 MPa, and elongation-to-failure of 6%. The observed high strength in this sample has been ascribed to the effect of grain refinement and the formation of sharp basal texture by the subsequent forging processing. The contribution of second-phase particles to the mechanical properties was also discussed in this paper. (C) 2012 Elsevier B.V. All rights reserved. |
| description.department | [shi, b. q.; chen, r. s.; ke, w.] chinese acad sci, inst met res, state key lab corros & protect, shenyang 110016, peoples r china. [shi, b. q.] chinese acad sci, grad univ, beijing 100049, peoples r china.;chen, rs (reprint author), chinese acad sci, inst met res, state key lab corros & protect, 62 wencui rd, shenyang 110016, peoples r china.;rschen@imr.ac.cn |
| Keyword | High Strength Magnesium Alloy Texture Control Ecae (Equal Channel Angular Extrusion) Forging Mechanical-properties Grain-size Mg Alloys Temperature |
| URL | 查看原文 |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/60221 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | B. Q. Shi,R. S. Chen,W. Ke. Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2012,546:323-327. |
| APA | B. Q. Shi,R. S. Chen,&W. Ke.(2012).Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,546,323-327. |
| MLA | B. Q. Shi,et al."Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 546(2012):323-327. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment