Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting

IMR OpenIR

	Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting
	Q. Yang; B. L. Xiao; Z. Y. Ma
	2012
发表期刊	Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science
ISSN	1073-5623
卷号	43A 期号:6 页码:2094-2109
摘要	Mg-10Gd-3Y-0.5Zr (wt pct) casting was subjected to friction stir processing (FSP) at a constant rotation rate of 800 rpm and varied travel speeds of 25, 50, and 100 mm/minute. FSP resulted in the generation of fine-grained microstructure and fundamental dissolution of coarse Mg-5(Gd,Y) phase at the grain boundaries, thereby enhancing the tensile properties significantly at both room and elevated temperatures. The grain size of the FSP samples decreased with the increasing travel speed, whereas the microstructure heterogeneity with the banded structure (onion rings) became evident at a higher travel speed. Tensile elongation of the FSP samples increased as the travel speed increased, whereas the highest strengths were obtained at the medium travel speed of 50 mm/minute. Higher strengths and greater elongations were observed for the FSP samples in the transverse direction (TD) than in the longitudinal direction (LD). After post-FSP aging, the strengths of the FSP samples were increased significantly with the TD and LD exhibiting the same strengths; however, the elongation was decreased remarkably with the TD having higher elongation than the LD. A variation of the tensile properties was discussed in detail based on the microstructure heterogeneity and fracture surfaces.
部门归属	[yang, q.; xiao, b. l.; ma, z. y.] chinese acad sci, shenyang natl lab mat sci, inst met res, shenyang 110016, peoples r china.;yang, q (reprint author), chinese acad sci, shenyang natl lab mat sci, inst met res, shenyang 110016, peoples r china.;zyma@imr.ac.cn
关键词	Magnesium Alloy Nugget Zone Strength Aluminum Welds Composites Behavior Texture Flow
URL	查看原文
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/60396
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	Q. Yang,B. L. Xiao,Z. Y. Ma. Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting[J]. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,2012,43A(6):2094-2109.
APA	Q. Yang,B. L. Xiao,&Z. Y. Ma.(2012).Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting.Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,43A(6),2094-2109.
MLA	Q. Yang,et al."Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting".Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 43A.6(2012):2094-2109.