| Preparation of SiC Fiber Reinforced Nickel Matrix Composite | |
| L. Zhang; N. L. Shi; J. Gong; C. Sun | |
| 2012 | |
| Source Publication | Journal of Materials Science & Technology
 |
| ISSN | 1005-0302 |
| Volume | 28Issue:3Pages:234-240 |
| Abstract | A method of preparing continuous (Al+Al2O3)-coated SiC fiber reinforced nickel matrix composite was presented, in which the diffusion between SiC fiber and nickel matrix could be prevented. Magnetron sputtering is used to deposit Ni coating on the surface of the (Al+Al2O3)-coated SiC fiber in preparation of the precursor wires. It is shown that the deposited Ni coating combines well with the (Al+Al2O3) coating and has little negative effect on the tensile strength of (Al+Al2O3)-coated SiC fiber. Solid-state diffusion bonding process is employed to prepare the (Al+Al2O3)-coated SiC fiber reinforced nickel matrix with 37% fibers in volume. The solid-state diffusion bonding process is optimized and the optimum parameters are temperature of 870 degrees, pressure of 50 MPa and holding time of 2 h. Under this condition, the precursor wires can diffuse well, composite of full density can be formed and the (Al+Al2O3) coating is effective to restrict the reaction between SiC fiber and nickel matrix. |
| description.department | [zhang, lu; shi, nanlin; gong, jun; sun, chao] chinese acad sci, inst met res, shenyang 110016, peoples r china.;sun, c (reprint author), chinese acad sci, inst met res, shenyang 110016, peoples r china.;csun@imr.ac.cn |
| Keyword | Sic Fiber Composite Diffusion Barrier Layer Precursor Wire Metal-matrix Theoretical-model Microstructure Fabrication |
| URL | 查看原文 |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/60443 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | L. Zhang,N. L. Shi,J. Gong,et al. Preparation of SiC Fiber Reinforced Nickel Matrix Composite[J]. Journal of Materials Science & Technology,2012,28(3):234-240. |
| APA | L. Zhang,N. L. Shi,J. Gong,&C. Sun.(2012).Preparation of SiC Fiber Reinforced Nickel Matrix Composite.Journal of Materials Science & Technology,28(3),234-240. |
| MLA | L. Zhang,et al."Preparation of SiC Fiber Reinforced Nickel Matrix Composite".Journal of Materials Science & Technology 28.3(2012):234-240. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment