Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol-gel method

IMR OpenIR

	Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol-gel method
	A. Kumar; N. Huang; T. Staedler; C. Sun; X. Jiang
	2013
发表期刊	Applied Surface Science
ISSN	0169-4332
卷号	265 页码:758-763
摘要	The surface and bucking instabilities of vertical well-aligned aluminum doped ZnO nanorods on the lime-glass substrates prepared using the sol-gel method are characterized by nanoindentation tests. Comprehensive structural analysis by X-ray diffraction and scanning electron microscopy reveal that the ZnO nanorods are grown as a single crystal along the [0 0 2] direction without any dislocation. Uniaxial compression tests of individual nanorods with the Berkovich and a conical indenter and of group of nanorods with flat punch indenter have been carried out. Using the Euler buckling model, the elastic moduli of ZnO nanorods using these three different indenters are within the range of 175-256 GPa. We discuss the relative merits of these two approaches for the determination of the elastic properties of ZnO nanorods, particularly considering the difference and difficulties of each approach. The ZnO nanorods prepared by the sol-gel method are mechanically strong and may assist the development of the applications of one dimensional nanorods. (C) 2012 Elsevier B.V. All rights reserved.
部门归属	[kumar, a. ; staedler, t. ; jiang, x.] univ siegen, inst mat engn, d-57076 siegen, germany. [huang, n. ; sun, c.] chinese acad sci, inst met res, shenyang 110016, peoples r china. ; kumar, a (reprint author), univ siegen, inst mat engn, d-57076 siegen, germany. ; aditya.kumar@uni-siegen.de
关键词	Nanorod Nanoindentation Mechanical Properties Sol-gel Zno Nanowires Film
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/71298
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	A. Kumar,N. Huang,T. Staedler,et al. Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol-gel method[J]. Applied Surface Science,2013,265:758-763.
APA	A. Kumar,N. Huang,T. Staedler,C. Sun,&X. Jiang.(2013).Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol-gel method.Applied Surface Science,265,758-763.
MLA	A. Kumar,et al."Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol-gel method".Applied Surface Science 265(2013):758-763.