Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling

IMR OpenIR

	Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling
	Z. Y. Liu; B. L. Xiao; W. G. Wang; Z. Y. Ma
	2013
发表期刊	Carbon
ISSN	0008-6223
卷号	62 页码:35-42
摘要	A route combining friction stir processing and subsequent rolling processing was established to fabricate 1.5-4.5 vol.% carbon nanotube (CNT)-reinforced 2009Al composites. Microstructural observations indicated that CNTs were individually dispersed and directionally aligned in the aluminum matrix of the CNT/2009Al composites. The tube structure of the CNTs was retained and the CNT-Al interface was bonded without pores. As a result, great increases in yield strength, ultimate tensile strength, and Young's modulus were achieved when a higher concentration of CNTs was incorporated. Moreover, the composites exhibited good ductility. In particular, 3 vol.% CNT/2009Al composite exhibited an ultimate tensile strength of 600 MPa and elongation of 10%, much higher strength-ductility than the corresponding values for CNT/Al composites fabricated by other processes. (c) 2013 Elsevier Ltd. All rights reserved.
部门归属	[liu, z. y. ; xiao, b. l. ; wang, w. g. ; ma, z. y.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china. ; ma, zy (reprint author), chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china. ; zyma@imr.ac.cn
关键词	Nanotube/aluminum Composites Powder-metallurgy Science Nanocomposites Technology Alloy
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/71387
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	Z. Y. Liu,B. L. Xiao,W. G. Wang,et al. Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling[J]. Carbon,2013,62:35-42.
APA	Z. Y. Liu,B. L. Xiao,W. G. Wang,&Z. Y. Ma.(2013).Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling.Carbon,62,35-42.
MLA	Z. Y. Liu,et al."Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling".Carbon 62(2013):35-42.