IMR OpenIR
Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet
D. R. Ni; D. L. Chen; D. Wang; B. L. Xiao; Z. Y. Ma
2013
Source PublicationMaterials & Design
ISSN0261-3069
Volume51Pages:199-205
AbstractTo elucidate the intrinsic factors which decreased the strength and ductility of friction stir welded (FSW) joints of precipitation-strengthened aluminium matrix composites, 3 mm thick rolled 17 vol.% SiCp/AA2009 composite sheet in T351 condition was subjected to FSW and detailed microstructure examinations. The microstructure of the base metal was characterized by high dislocation density and few precipitates. After FSW, low dislocation density and a few coarse theta (Al2Cu) precipitates were detected in the nugget zone, whereas a great number of coarse theta and S (Al2CuMg) precipitates and greatly decreased dislocation density were observed in the heat-affected zone (HAZ). Therefore, the HAZ showed the lowest hardness throughout the whole joint and became the weakest region, where fracture occurred during tensile testing. The FSW joint exhibited a good combination of strength and ductility with the ultimate tensile strength, elongation and joint efficiency reaching 443 MPa, 4.7% and 77%, respectively. (c) 2013 Elsevier Ltd. All rights reserved.
description.department[ni, d. r. ; wang, d. ; xiao, b. l. ; ma, z. y.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china. [chen, d. l.] ryerson univ, dept mech & ind engn, toronto, on m5b 2k3, canada. ; ma, zy (reprint author), chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china. ; zyma@imr.ac.cn
KeywordFriction Stir Welding Metal-matrix Composites Mechanical Properties Differential Scanning Calorimetry Fractography Metal-matrix Composites Particulate-reinforced Composite Cu-mg Composite Mechanical-properties Tool Wear Aa2009/sic Composites Fatigue Properties Cast Composite Butt Joints Precipitation
URL查看原文
Language英语
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/71414
Collection中国科学院金属研究所
Recommended Citation
GB/T 7714
D. R. Ni,D. L. Chen,D. Wang,et al. Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet[J]. Materials & Design,2013,51:199-205.
APA D. R. Ni,D. L. Chen,D. Wang,B. L. Xiao,&Z. Y. Ma.(2013).Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet.Materials & Design,51,199-205.
MLA D. R. Ni,et al."Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet".Materials & Design 51(2013):199-205.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[D. R. Ni]'s Articles
[D. L. Chen]'s Articles
[D. Wang]'s Articles
Baidu academic
Similar articles in Baidu academic
[D. R. Ni]'s Articles
[D. L. Chen]'s Articles
[D. Wang]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[D. R. Ni]'s Articles
[D. L. Chen]'s Articles
[D. Wang]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.