Investigation on NiAl-TiC-Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion

IMR OpenIR

	Investigation on NiAl-TiC-Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion
	L. Y. Sheng; F. Yang; J. T. Guo; T. F. Xi; H. Q. Ye
	2013
发表期刊	Composites Part B-Engineering
ISSN	1359-8368
卷号	45 期号:1 页码:785-791
摘要	The NiAl-TiC-Al2O3 in situ composite was fabricated by self-propagation high temperature synthesis and hot extrusion (SHS/HE) technique using element powders. Its microstructure and mechanical properties were investigated by OM, SEM, TEM and compression test. The results revealed that the NiAl-TiC-Al2O3 composite was densified by the SHS/HE process and had fine microstructure. In the composite, TiC particles along NiAl grain boundary agglomerated and grew, but the TiC particles in NiAl grain were fine. The TiC and Al2O3 particles exhibited an obvious trend to distribute along extrusion direction. Moreover, stacking fault and microtwins in TiC particles and thin amorphous layer along NiAl/TiC phase interface were also observed. In addition, Ti2AlC particle with intergrowth TiC plate inside formed along the NiAl grain boundary. Generally the SHS/HE synthesized NiAl-TiC-Al2O3 composite possessed better mechanical properties, especially at room temperature, which should be ascribed to the fine microstructure and predeformation caused by hot extrusion. (c) 2012 Elsevier Ltd. All rights reserved.
部门归属	[sheng, l. y.] pku hkust shenzhen hongkong inst, shenzhen 518057, peoples r china. [sheng, l. y. ; xi, t. f.] peking univ, coll engn, beijing 100871, peoples r china. [yang, f.] shenzhen baoan int airport, shenzhen airlines, shenzhen 518128, peoples r china. [guo, j. t. ; ye, h. q.] chinese acad sci, inst met res, shenyang 110016, peoples r china. ; sheng, ly (reprint author), pku hkust shenzhen hongkong inst, shenzhen 518057, peoples r china. ; lysheng@yeah.net
关键词	Intermetallics Particle-reinforcement Microstructure Mechanical Properties In-situ Composite Mechanical-properties Compressive Properties Fracture-toughness Eutectic Alloy Wear Behavior Microstructure
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/71449
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	L. Y. Sheng,F. Yang,J. T. Guo,et al. Investigation on NiAl-TiC-Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion[J]. Composites Part B-Engineering,2013,45(1):785-791.
APA	L. Y. Sheng,F. Yang,J. T. Guo,T. F. Xi,&H. Q. Ye.(2013).Investigation on NiAl-TiC-Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion.Composites Part B-Engineering,45(1),785-791.
MLA	L. Y. Sheng,et al."Investigation on NiAl-TiC-Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion".Composites Part B-Engineering 45.1(2013):785-791.