Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer

IMR OpenIR

	Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer
	W. H. Zhang; D. Q. Sun; L. J. Han; D. Y. Liu
	2014
发表期刊	Materials & Design
ISSN	0261-3069
卷号	57 页码:186-194
摘要	Dissimilar materials of H220YD galvanised high strength steel and 6008-T66 aluminium alloy were welded by means of median frequency direct current resistance spot welding with employment of 4047 AlSi12 interlayer. Effects of interlayer thickness on microstructure and mechanical property of the welded joints were studied. The welded joint with interlayer employed could be recognised as a brazed joint. The nugget diameter had a decreased tendency with increasing thickness of interlayer under optimised welding parameters. An intermetallic compound layer composed of Fe-2(Al,Si)(5) and Fe-4(Al,Si)(13) was formed at the interfacial zone in the welded joint, the thickness and morphology of which varying with the increase of interlayer thickness. Reaction diffusion at the steel/aluminium interface was inhibited by introduction of silicon atoms, which restricted growth of Fe-2(Al,Si)(5). Tensile shear load of welded joints experienced an increased tendency with increasing interlayer thickness from 100 to 300 mu m, and the maximum tensile shear load of 6.2 kN was obtained with interlayer thickness of 300 mu m, the fractured welded joint of which exhibiting a nugget pullout failure mode. (C) 2013 Elsevier Ltd. All rights reserved.
部门归属	[zhang, weihua] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china. [sun, daqian ; liu, dongyang] jilin univ, sch mat sci & engn, minist educ, key lab automobile mat, changchun 130022, peoples r china. [han, lijun] faw volkswagen automobile co ltd, dept prod management, changchun 130011, peoples r china. ; sun, dq (reprint author), jilin univ, sch mat sci & engn, minist educ, key lab automobile mat, changchun 130022, peoples r china. ; psdq@sina.com
关键词	Interfacial Microstructure Mechanical Property Resistance Spot Welding Dissimilar Material Welded Joints Interlayer Zinc-based Filler Stainless-steel Automotive Applications Welding Parameters Galvanized Steel Mild-steel Lap Joint Laser Layer Wire
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/72602
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	W. H. Zhang,D. Q. Sun,L. J. Han,et al. Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer[J]. Materials & Design,2014,57:186-194.
APA	W. H. Zhang,D. Q. Sun,L. J. Han,&D. Y. Liu.(2014).Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer.Materials & Design,57,186-194.
MLA	W. H. Zhang,et al."Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer".Materials & Design 57(2014):186-194.