Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing

IMR OpenIR

	Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing
	Q. Zhang; B. L. Xiao; Q. Z. Wang; Z. Y. Ma
	2014
发表期刊	Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science
ISSN	1073-5623
卷号	45A 期号:6 页码:2776-2791
摘要	In situ (Al3Ti + Al2O3)/Al composites were fabricated in an Al-TiO2 system by the combination of hot pressing (HP) and friction-stir processing (FSP). The effects of HP and FSP parameters on the microstructures and mechanical properties of the in situ composites were studied. The Al-TiO2 reaction extent increased with increasing the temperature and holding time of HP. Subsequent FSP not only induced Al-TiO2 reaction, resulting in the formation of nanosized Al3Ti and Al2O3, but also rounded the polygonal Al3Ti particles formed during HP. The tensile strength of the FSP sample in which the Al-TiO2 reaction took place completely during HP was lower than that of the FSP samples in which the Al-TiO2 reaction took place hardly or partly during HP. For the FSP samples in which the Al-TiO2 reaction took place hardly during HP, the volume fraction of reinforcing particles increased with decreasing the traverse speed, resulting in the increase in tensile strength of the FSP samples. At a traverse speed of 25 mm/min, increasing the rotation rate from 1000 to 2000 rpm produced little influence on the microstructures and mechanical properties of the in situ composites. Additional 2-pass FSP in water refined the matrix grains, resulting in the significant increase in the tensile strength.
部门归属	[zhang, q. ; xiao, b. l. ; wang, q. z. ; ma, z. y.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china. ; ma, zy (reprint author), chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china. ; zyma@imr.ac.cn
关键词	Aluminum-matrix Composites Al-tio2 System Al Composites Friction Al3ti Evolution Al2o3 Superplasticity Alloy
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/72965
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	Q. Zhang,B. L. Xiao,Q. Z. Wang,et al. Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing[J]. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,2014,45A(6):2776-2791.
APA	Q. Zhang,B. L. Xiao,Q. Z. Wang,&Z. Y. Ma.(2014).Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing.Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,45A(6),2776-2791.
MLA	Q. Zhang,et al."Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing".Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 45A.6(2014):2776-2791.