Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels

IMR OpenIR

	Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels
	W. F. Zhang; W. Sha; W. Yan; W. Wang; Y. Y. Shan; K. Yang
	2014
发表期刊	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
ISSN	0921-5093
卷号	604 页码:207-214
摘要	Hot compression tests were carried out on 9Cr-Nb-V heat resistant steels in the temperature range of 600-1200 degrees C and the strain rate range of 10(-2)-10(0) s(-1) to study their deformation characteristics. The full recrystallization temperature and the carbon-free bainite phase transformation temperature were determined by the slope-change points in the curve of mean flow stress versus the inverse of temperature. The parameters of the constitutive equation for the experimental steels were calculated, including the stress exponent and the activation energy. The lower carbon content in steel would increase the fraction of precipitates by increasing the volume of dynamic strain-induced (DSIT) ferrite during deformation. The In(e) versus In(Z) and the ln(sigma(c)) versus In(Z) plots for both steels have similar trends. The efficiency of power dissipation maps with instability maps merged together show excellent workability from the strain of 0.05 to 0.6. The microstructure of the experimental steels was fully recrystallized upon deformation at low Z value owing to the dynamic recrystallization (DRX), and exhibited a necklace structure under the condition of 1050 degrees C/0.1 s(-1) due to the suppression of the secondary flow of DRX. However, there were barely any DRX grains but elongated pancake grains under the condition of 1000 degrees C/1 s(-1) because of the suppression of the metadynamic recrystallization (MDRX). (C) 2014 Elsevier B.V. All rights reserved.
部门归属	[zhang, wen feng] univ sci & technol china, hefei 230026, peoples r china. [zhang, wen feng ; yan, wei ; wang, wei ; shan, yi yin ; yang, ke] chinese acad sci, inst met res, shenyang 110016, peoples r china. [zhang, wen feng] chinese acad sci, grad sch, beijing 100049, peoples r china. [sha, wei] queens univ belfast, sch planning architecture & civil engn, belfast bt9 5ag, antrim, north ireland. ; yang, k (reprint author), chinese acad sci, inst met res, shenyang 110016, peoples r china. ; kyang@imr.ac.cn
关键词	Steel Mechanical Characterization Martensite Thermomechanical Processing Recrystallization Phase Transformation Hot-working Dynamic Recrystallization Austenite Precipitation Nb Transformation Kinetics n)
URL	查看原文
语种	英语
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/72968
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	W. F. Zhang,W. Sha,W. Yan,et al. Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2014,604:207-214.
APA	W. F. Zhang,W. Sha,W. Yan,W. Wang,Y. Y. Shan,&K. Yang.(2014).Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,604,207-214.
MLA	W. F. Zhang,et al."Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 604(2014):207-214.