IMR OpenIR
Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach
T. Lin; H. W. Song; S. H. Zhang; M. Cheng; W. J. Liu
2014
发表期刊Advances in Mechanical Engineering
ISSN1687-8132
摘要Hot stamping tools with cooling systems are the key facilities for hot stamping process of Ultrahigh strength steels (UHSS) in automotive industry. Hot stamping tools have significant influence on the final microstructure and properties of the hot stamped parts. In serials production, the tools should be rapidly cooled by cooling water. Hence, design of hot stamping tools with cooling systems is important not only for workpieces of good quality but also for the tools with good cooling performance and long life. In this paper, a new multifield simulation method was proposed for the design of hot stamping tools with cooling system. The deformation of the tools was also analyzed by this method. Based on MpCCI (Mesh-based parallel Code Coupling Interface), thermal-fluid simulation and thermal-fluid-mechanical coupled simulation were performed. Subsequently, the geometrical parameters of the cooling system are investigated for the design. The results show that, both the distance between the ducts and the distance between the ducts and the tools loaded contour have significant influence on the quenching effect. And better quenching effect can be achieved with the shorter distance from the tool surface and with smaller distance between ducts. It is also shown that, thermal expansion is the main reason for deformation of the hot forming tools, which causes the distortion of the cooling ducts, and the stress concentration at corner of the ducts.
部门归属[lin, tao ; song, hong-wu ; zhang, shi-hong ; cheng, ming] chinese acad sci, inst met res, shenyang 110016, peoples r china. [liu, wei-jie] northeastern univ, res acad, shenyang 110819, peoples r china. ; zhang, sh (reprint author), chinese acad sci, inst met res, shenyang 110016, peoples r china. ; shzhang@imr.ac.cn
关键词High-strength Steels Numerical-simulation Heat-transfer
URL查看原文
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/73291
专题中国科学院金属研究所
推荐引用方式
GB/T 7714
T. Lin,H. W. Song,S. H. Zhang,et al. Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach[J]. Advances in Mechanical Engineering,2014.
APA T. Lin,H. W. Song,S. H. Zhang,M. Cheng,&W. J. Liu.(2014).Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach.Advances in Mechanical Engineering.
MLA T. Lin,et al."Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach".Advances in Mechanical Engineering (2014).
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[T. Lin]的文章
[H. W. Song]的文章
[S. H. Zhang]的文章
百度学术
百度学术中相似的文章
[T. Lin]的文章
[H. W. Song]的文章
[S. H. Zhang]的文章
必应学术
必应学术中相似的文章
[T. Lin]的文章
[H. W. Song]的文章
[S. H. Zhang]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。