| Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy | |
| Demirtas, M.; Purcek, G.; Yanar, H.; Zhang, Z. J.; Zhang, Z. F.; purcek@ktu.edu.tr | |
| 2016 | |
| Source Publication | JOURNAL OF ALLOYS AND COMPOUNDS
 |
| ISSN | 0925-8388 |
| Volume | 663Pages:775-783 |
| Abstract | The Zn-22 wt.% Al was processed using five different selected routes including thermal, thermomechanical and severe plastic deformation (SPD) techniques in order to produce ultrafine grained (UFG) microstructure for achieving room temperature (RT) and high strain rate (HSR) superplasticity, and to compare the same set of the results. After all routes, the microstructural evolutions and RT uniaxial tensile tests at different strain rates ranging from 1 x 10(-3) to 1 x 10(0) s(-1) were investigated. The smallest grain size was achieved to be 300 nm after the thermo-mechanical process including conventional hot and cold rolling steps. However, the lamellar microstructure of the alloy was not completely eliminated during that process. On the other hand, equal-channel angular pressing (ECAP) as one of the SPD techniques decreased the grain size down to 400 nm with a lamellar-free microstructure. The maximum elongation value was achieved to be 330% with the sample tested at 1 x 10(-3) s(-1) after a thermomechanical process including conventional hot and cold rolling, and an aging stage between these rolling steps. It was found that lamellar-free microstructure causes higher superplastic elongation even if it has higher grain size compared to the sample having partially lamellar structure. (C) 2015 Elsevier B.V. All rights reserved. |
| description.department | [demirtas, m.] bayburt univ, dept mech engn, tr-69000 bayburt, turkey ; [purcek, g. ; yanar, h.] karadeniz tech univ, dept mech engn, tr-61080 trabzon, turkey ; [zhang, z. j. ; zhang, z. f.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china |
| Keyword | Zn-22al Alloy Superplasticity Ufg Materials Severe Plastic Deformation |
| Funding Organization | Scientific Research Projects of Karadeniz Technical University, Turkey [10501] |
| Indexed By | sci |
| Language | 英语 |
| WOS ID | WOS:000369060200104 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/74744 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | purcek@ktu.edu.tr |
| Recommended Citation GB/T 7714 | Demirtas, M.,Purcek, G.,Yanar, H.,et al. Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2016,663:775-783. |
| APA | Demirtas, M.,Purcek, G.,Yanar, H.,Zhang, Z. J.,Zhang, Z. F.,&purcek@ktu.edu.tr.(2016).Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy.JOURNAL OF ALLOYS AND COMPOUNDS,663,775-783. |
| MLA | Demirtas, M.,et al."Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy".JOURNAL OF ALLOYS AND COMPOUNDS 663(2016):775-783. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment