Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy | |
Demirtas, M.; Purcek, G.; Yanar, H.; Zhang, Z. J.; Zhang, Z. F.; purcek@ktu.edu.tr | |
2015 | |
发表期刊 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
![]() |
ISSN | 0921-5093 |
卷号 | 644页码:17-24 |
摘要 | Quasi-single phase (dilute) Zn-0.3Al alloy was subjected to severe plastic deformation via equal-channel angular extrusion/pressing (ECAE/P), and the effects of ECAP on its room temperature (RT) and high strain rate (HSR) superplasticity and deformation mechanism were investigated. Multi-pass ECAP may refine the coarse-grained microstructure into the fine grained (FG) one. The grain size of Zn-matrix phase decreased down to 2.0 mu m after ECAP. Many spherical Al-rich precipitates decomposed and homogeneously distributed inside the matrix phase. They are ultrafine grained (UFG) beta-particles with the grain sizes ranging from 50 nm to similar to 200 nm. This special microstructure having FG and UFG micro-constituents brought about an improvement in RI superplasticity even at HSRs. While multi-pass ECAP decreased flow stress of the alloy, its elongation to failure increased substantially depending on the initial strain rates. The maximum elongation was 1000% at a low strain rate of 10(-4) s(-1), and 350% elongation was achieved at a high strain rate of 10(-2) s(-1). Grain boundary sliding (GBS) was found to be the main deformation mechanism in region-II as the optimum superplastic region. (C) 2015 Elsevier B.V. All rights reserved. |
部门归属 | [demirtas, m.] bayburt univ, dept mech engn, tr-69000 bayburt, turkey ; [purcek, g. ; yanar, h.] karadeniz tech univ, dept mech engn, tr-61080 trabzon, turkey ; [zhang, z. j. ; zhang, z. f.] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china |
关键词 | Room Temperature Superplasticity Dilute Zn-al Alloys Fine-grained Microstructure Severe Plastic Deformation |
资助者 | Karadeniz Technical University, Turkey [10501] |
收录类别 | sci |
语种 | 英语 |
WOS记录号 | WOS:000361258200003 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/74748 |
专题 | 中国科学院金属研究所 |
通讯作者 | purcek@ktu.edu.tr |
推荐引用方式 GB/T 7714 | Demirtas, M.,Purcek, G.,Yanar, H.,et al. Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2015,644:17-24. |
APA | Demirtas, M.,Purcek, G.,Yanar, H.,Zhang, Z. J.,Zhang, Z. F.,&purcek@ktu.edu.tr.(2015).Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,644,17-24. |
MLA | Demirtas, M.,et al."Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 644(2015):17-24. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论