Hot top design and its influence on feeder channel segregates in 100-ton steel ingots

IMR OpenIR

	Hot top design and its influence on feeder channel segregates in 100-ton steel ingots
	Qian, Shengwen; Hu, Xiaoqiang; Cao, Yanfei; Kang, Xiuhong; Li, Dianzhong; xhkang@imr.ac.cn
	2015
发表期刊	MATERIALS & DESIGN
ISSN	0261-3069
卷号	87 页码:205-214
摘要	The influence of hot top design on feeder channel segregates (F-CS) and centerline shrinkage porosities (C-SP) were investigated both experimentally and numerically. Two 100-ton 30Cr2Ni4MoV steel ingots with different insulating hot tops were longitudinally sectioned. The experimental results showed few channel segregates but severe shrinkage porosities appeared in the ingot with poorly insulated hot top, while it was the opposite case after the improved hot topping practice. By employing the finite element numerical simulation, the critical condition for the formation of F-CS in 30Cr2Ni4MoV steel was verified to be R(2.1)G <= 1.0 x 10(-5) degrees C mm(1.1) s(-2.1). Through coupling with the published C-SP criterion (GR(-0.5) <= 2.5 degrees C mm(-15) s(0.5)), it was found out that the increase of hot-top height and preheating temperature would aggravate F-CS while alleviate C-SP contrarily. Hence, to comprehensively control those two defects, the optimum hot-top height and preheating temperature for 100-ton ingot were suggested to be 700 mm and 600 degrees C, respectively. Ultimately, the ratio of the solidification time for the whole ingot to the ingot body (t(f)/t(b)) was proposed as a novel criterion for hot top design. This practical criterion has been successfully utilized to optimize the hot top of a 5-ton steel ingot. (C) 2015 Elsevier Ltd. All rights reserved.
部门归属	[qian, shengwen ; hu, xiaoqiang ; cao, yanfei ; kang, xiuhong ; li, dianzhong] chinese acad sci, inst met res, shenyang natl lab mat sci, shenyang 110016, peoples r china
关键词	Hot Top Design Feeder Channel Segregate Shrinkage Porosity Steel Ingot
收录类别	sci
语种	英语
WOS记录号	WOS:000363816000024
引用统计	被引频次：17[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/74895
专题	中国科学院金属研究所
通讯作者	xhkang@imr.ac.cn
推荐引用方式 GB/T 7714	Qian, Shengwen,Hu, Xiaoqiang,Cao, Yanfei,et al. Hot top design and its influence on feeder channel segregates in 100-ton steel ingots[J]. MATERIALS & DESIGN,2015,87:205-214.
APA	Qian, Shengwen,Hu, Xiaoqiang,Cao, Yanfei,Kang, Xiuhong,Li, Dianzhong,&xhkang@imr.ac.cn.(2015).Hot top design and its influence on feeder channel segregates in 100-ton steel ingots.MATERIALS & DESIGN,87,205-214.
MLA	Qian, Shengwen,et al."Hot top design and its influence on feeder channel segregates in 100-ton steel ingots".MATERIALS & DESIGN 87(2015):205-214.