Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod | |
Tian, Jialong; Wang, Wei; Yan, Wei; Jiang, Zhouhua; Shan, Yiyin; Yang, Ke; Yan, W (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China. | |
2016-07-01 | |
发表期刊 | ENGINEERING FAILURE ANALYSIS
![]() |
ISSN | 1350-6307 |
卷号 | 65页码:57-64 |
摘要 | The 17-4 PH stainless steel is employed to produce piston rods in industry due to the high strength and toughness, good workability and nice corrosion resistance. In the present failure analysis, obvious long cracks were observed along the longitudinal direction on the surface of the commercial 17-4 PH stainless steel piston rod after heat treatment. The cracks were carefully looked into by observing the crack tip and characterizing the microstructure along the cracks. The results showed that the cracks were mostly initiated from the surface of the rod and propagated along the phase boundary between martensite and delta ferrite. The EDXA showed that the segregation of Cu and Ni should be responsible for the cracking after heat treatment. In order to define when the crack was coming into being, oxidation film along the crack was considered as a clue. The scrutiny of the oxidation film on the crack edge illustrated that the crack should be formed right in the heat treatment of aging. (C) 2016 Elsevier Ltd. All rights reserved. |
部门归属 | [tian, jialong ; jiang, zhouhua] northeastern univ, sch met & mat, shenyang 110004, peoples r china ; [tian, jialong ; wang, wei ; yan, wei ; shan, yiyin ; yang, ke] chinese acad sci, inst met res, shenyang 110016, peoples r china |
关键词 | 17-4 Ph Steel Piston Rod Crack |
学科领域 | Engineering ; Materials Science |
资助者 | Shenyang Yuanda Compressor Manufacturing Co. Ltd. |
收录类别 | sci |
语种 | 英语 |
WOS记录号 | WOS:000374330800006 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/75820 |
专题 | 中国科学院金属研究所 |
通讯作者 | Yan, W (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China. |
推荐引用方式 GB/T 7714 | Tian, Jialong,Wang, Wei,Yan, Wei,et al. Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod[J]. ENGINEERING FAILURE ANALYSIS,2016,65:57-64. |
APA | Tian, Jialong.,Wang, Wei.,Yan, Wei.,Jiang, Zhouhua.,Shan, Yiyin.,...&Yan, W .(2016).Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod.ENGINEERING FAILURE ANALYSIS,65,57-64. |
MLA | Tian, Jialong,et al."Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod".ENGINEERING FAILURE ANALYSIS 65(2016):57-64. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论