The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting

IMR OpenIR

	The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
	Zhao, S.; Li, S. J.; Hou, W. T.; Hao, Y. L.; Yang, R.; Misra, R. D. K.; Li, SJ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China.
	2016-06-01
发表期刊	JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
ISSN	1751-6161
卷号	59 页码:251-264
摘要	Additive manufacturing technique is a promising approach for fabricating cellular bone substitutes such as trabecular and cortical bones because of the ability to adjust process parameters to fabricate different shapes and inner structures. Considering the long term safe application in human body, the metallic cellular implants are expected to exhibit superior fatigue property. The objective of the study was to study the influence of cell shape on the compressive fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting. The results indicated that the underlying fatigue mechanism for the three kinds of meshes (cubic, G7 and rhombic dodecahedron) is the interaction of cyclic ratcheting and fatigue crack growth on the struts, which is closely related to cumulative effect of buckling and bending deformation of the strut. By increasing the buckling deformation on the struts through cell shape design, the cyclic ratcheting rate of the meshes during cyclic deformation was decreased and accordingly, the compressive fatigue strength was increased. With increasing bending deformation of struts, fatigue crack growth in struts contributed more to the fatigue damage of meshes. Rough surface and pores contained in the struts significantly deteriorated the compressive fatigue strength of the struts. By optimizing the buckling and bending deformation through cell shape design, Ti-6Al-4V alloy cellular solids with high fatigue strength and low modulus can be fabricated by the EBM technique. (C) 2015 Elsevier Ltd. All rights reserved.
部门归属	[zhao, s. ; li, s. j. ; hou, w. t. ; hao, y. l. ; yang, r.] chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china ; [misra, r. d. k.] univ texas el paso, dept met mat & biomed engn, 500w univ ave, el paso, tx 79968 usa
关键词	Electron Beam Melting Titanium Alloys Reticulated Mesh Compressive Fatigue Behavior Cell Shape Effect
学科领域	Engineering ; Materials Science
资助者	863 Project [2015AA033702]; National Basic Research Program of China [2012CB619103, 2012CB933901, 2012CB933902]; National Natural Science Foundation of China [51271182, 51271180]; University of Texas at El Paso
收录类别	sci
语种	英语
WOS记录号	WOS:000376693900023
引用统计	被引频次：192[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/75857
专题	中国科学院金属研究所
通讯作者	Li, SJ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Zhao, S.,Li, S. J.,Hou, W. T.,et al. The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting[J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS,2016,59:251-264.
APA	Zhao, S..,Li, S. J..,Hou, W. T..,Hao, Y. L..,Yang, R..,...&Li, SJ .(2016).The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting.JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS,59,251-264.
MLA	Zhao, S.,et al."The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting".JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS 59(2016):251-264.