Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility

IMR OpenIR

	Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility
	Tian, Y. Z.; Zhao, L. J.; Park, N.; Liu, R.; Zhang, P.; Zhang, Z. J.; Shibata, A.; Zhang, Z. F.; Tsuji, N.; Tian, YZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China.
	2016-05-15
发表期刊	ACTA MATERIALIA
ISSN	1359-6454
卷号	110 页码:61-72
摘要	Fully recrystallized Cu-4 at.%Al alloy and Cu-11 at.%Al alloy with grain sizes ranging from 0.5 mu m to 80 mu m were fabricated by cold rolling and annealing. Tensile tests showed that yield strength, ultimate tensile strength and uniform elongation of the two Cu-Al alloys had linear relationships with the inverse square root of the grain size, and both the tensile strength and uniform elongation were ameliorated with decreasing the stacking fault energy. The strain-hardening curves of the Cu-4 at.%Al alloy shifted slightly with increasing the grain size, but the strain-hardening curves of the Cu-11 at.%Al alloy were very sensitive to the grain size. Microstructures of both alloys deformed to different tensile strains showed that the Cu-4 at.%Al alloy was favored by dislocation slip; in contrast, dislocation slip, stacking faults and deformation twins were widely observed in the Cu-11 at.%Al alloy, and their roles changed at different strain levels in the specimens with different grain sizes. Finally, mechanisms of achieving high strength and ductility in low-SFE materials were analyzed based on the strain-hardening behavior and deformation patterns. Optimal grain size ranges of 0.2-1 mu m for the Cu-4 at.%Al alloy and 1-3 mu m for the Cu-11 at.%Al alloy were proposed to achieve superior comprehensive mechanical properties. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
部门归属	[tian, y. z. ; liu, r. ; zhang, p. ; zhang, z. j. ; zhang, z. f.] chinese acad sci, inst met res, shenyang natl lab mat sci, 72 wenhua rd, shenyang 110016, peoples r china ; [tian, y. z. ; zhao, l. j. ; park, n. ; shibata, a. ; tsuji, n.] kyoto univ, dept mat sci & engn, sakyo ku, yoshida honmachi, kyoto 6068501, japan ; [tian, y. z. ; shibata, a. ; tsuji, n.] kyoto univ, esism, sakyo ku, yoshida honmachi, kyoto 6068501, japan ; [zhao, l. j.] colorado sch mines, dept met & mat engn, adv steel proc & prod res ctr, golden, co 80401 usa ; [park, n.] yeungnam univ, sch mat sci & engn, gyongsan 712749, south korea
关键词	Cu-al Alloy Stacking Fault Energy (Sfe) Strength Ductility Twin
学科领域	Materials Science ; Metallurgy & Metallurgical Engineering
资助者	National Natural Science Foundation of China (NSFC) [51331007, 51501198]; Elements Strategy Initiative for Structural Materials (ESISM); Ministry of Education, Culture, Sports, Science, and Technology (MEXT), Japan [2201]
收录类别	sci
语种	英语
WOS记录号	WOS:000374810400007
引用统计	被引频次：119[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/75874
专题	中国科学院金属研究所
通讯作者	Tian, YZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Tian, Y. Z.,Zhao, L. J.,Park, N.,et al. Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility[J]. ACTA MATERIALIA,2016,110:61-72.
APA	Tian, Y. Z..,Zhao, L. J..,Park, N..,Liu, R..,Zhang, P..,...&Tian, YZ .(2016).Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility.ACTA MATERIALIA,110,61-72.
MLA	Tian, Y. Z.,et al."Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility".ACTA MATERIALIA 110(2016):61-72.