Influence of Processing Conditions on Microstructure and Mechanical Properties of Large Thin-Wall Centrifugal Ti-6Al-4V Casting

IMR OpenIR

	Influence of Processing Conditions on Microstructure and Mechanical Properties of Large Thin-Wall Centrifugal Ti-6Al-4V Casting
	Feng, Xin; Qiu, Jianke; Ma, Yingjie; Lei, Jiafeng; Cui, Yuyou; Wu, Xinhua; Yang, Rui; Lei, JF (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
	2016-04-01
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	32 期号:4 页码:362-371
摘要	In this work, the effects of mould pre-heating temperatures and hot isostatic pressing (HIPping) process on the microstructural characteristics and mechanical properties, including static tensile and damage-tolerance properties of large thin-wall cylindrical Ti-6Al-4V casting, have been studied. The experimental results show that with the increasing mould pre-heating temperature from 673 to 873 K, the casting microstructures change from a mixture of Widmanstatten and colony microstructure to a primary colony. The centre of the thick wall section has relatively coarse microstructure than the edge and thin section. Lower mould pre-heating temperature brings about more porosities. HIPping process, which not only reduces the casting pores effectively but also increases the prior beta grain boundary cohesion and coarsens the microstructure, is essential to improving the ductility of the casting. Due to the oxygen contamination and finer microstructure on the surface, micro-hardness profiles on the cross section present a decreasing tendency from the surface to inner. The thickness of the reaction layers for the different mould pre-heating temperatures is nearly the same (similar to 450 mu m). On the whole, the tensile strength and microhardness decrease with increasing mould pre-heating temperature from 673 to 873 K. However, the fracture toughness and fatigue crack growth resistance of the castings increase with increasing mould preheating temperature. Copyright (C) 2016, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited. All rights reserved.
部门归属	[feng, xin ; qiu, jianke ; ma, yingjie ; lei, jiafeng ; cui, yuyou ; yang, rui] chinese acad sci, inst met res, shenyang 110016, peoples r china ; [wu, xinhua] monash univ, dept mat engn, melbourne, vic 3800, australia
关键词	Ti-6al-4v Alloy Centrifugal Investment Casting Hot Isostatic Pressing Casting Microstructure Tensile Properties Damage-tolerance Properties
学科领域	Materials Science ; Metallurgy & Metallurgical Engineering
资助者	COLTS programme [FP7-AAT-2010-RTD-CHINA]
收录类别	sci
语种	英语
WOS记录号	WOS:000373911600011
引用统计	被引频次：31[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/75924
专题	中国科学院金属研究所
通讯作者	Lei, JF (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Feng, Xin,Qiu, Jianke,Ma, Yingjie,et al. Influence of Processing Conditions on Microstructure and Mechanical Properties of Large Thin-Wall Centrifugal Ti-6Al-4V Casting[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2016,32(4):362-371.
APA	Feng, Xin.,Qiu, Jianke.,Ma, Yingjie.,Lei, Jiafeng.,Cui, Yuyou.,...&Lei, JF .(2016).Influence of Processing Conditions on Microstructure and Mechanical Properties of Large Thin-Wall Centrifugal Ti-6Al-4V Casting.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,32(4),362-371.
MLA	Feng, Xin,et al."Influence of Processing Conditions on Microstructure and Mechanical Properties of Large Thin-Wall Centrifugal Ti-6Al-4V Casting".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 32.4(2016):362-371.