Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature

IMR OpenIR

	Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature
	Zhang, Shi-Hong; Ye, Neng-Yong; Cheng, Ming; Song, Hong-Wu; Zhou, Hong-Wei; Wang, Ping-Bo; Cheng, M (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.; Cheng, M (reprint author), Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China.
	2016
发表期刊	METALS
ISSN	2075-4701
卷号	6 期号:1
摘要	The mechanical properties of GH4169 alloy sheet after cold rolling (at 0%, 10%, 30%, 50% and 70%) and solid solution were investigated. The textures and Taylor factors were characterized using electron backscattering diffraction (EBSD). The fractions of delta phase were measured by X-ray diffraction. The contributions of delta phase, grain size, texture, and work hardening on the mechanical properties were also discussed. The results showed increases in the yield strength (YS) (0.2%) as well as the ultimate tensile strength (UTS) of GH4169 superalloy sheet after cold rolling, when rolling reduction was increased. In contrast, following solid solution treatment, YS and UTS were increased then subsequently decreased. The changes of yield strength of GH4169 superalloy were attributed to the texture and work hardening, followed by the grain refinement and precipitation of delta phase. When the rolling reduction was below 30%, the influence of delta phase was greater than grain refinement and when the rolling reduction was larger than 50%, the controversial results occur. The precipitation of delta phase promoted the improvement of yield strength, the relationship between the fraction of delta phase and improved yield strength satisfactory fit to the following equation: sigma(delta) = 15.9W(delta)+ 59.7.
部门归属	[zhang, shi-hong ; ye, neng-yong ; cheng, ming ; song, hong-wu] chinese acad sci, inst met res, shenyang 110016, peoples r china ; [ye, neng-yong ; cheng, ming ; zhou, hong-wei ; wang, ping-bo] lanzhou univ technol, state key lab adv proc & recycling nonferrous met, lanzhou 730050, peoples r china
关键词	Gh4169 Alloy Cold Rolling Mechanical Property Phase Fraction Heat Treatment
学科领域	Materials Science ; Metallurgy & Metallurgical Engineering
资助者	fund of Special Inventive Fund of Science and Technology in Shenyang [F15-172-6-00]; State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology [SKLAB02014001]
收录类别	sci
语种	英语
WOS记录号	WOS:000375842100001
引用统计	被引频次：8[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/75968
专题	中国科学院金属研究所
通讯作者	Cheng, M (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.; Cheng, M (reprint author), Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China.
推荐引用方式 GB/T 7714	Zhang, Shi-Hong,Ye, Neng-Yong,Cheng, Ming,et al. Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature[J]. METALS,2016,6(1).
APA	Zhang, Shi-Hong.,Ye, Neng-Yong.,Cheng, Ming.,Song, Hong-Wu.,Zhou, Hong-Wei.,...&Cheng, M .(2016).Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature.METALS,6(1).
MLA	Zhang, Shi-Hong,et al."Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature".METALS 6.1(2016).